Panasonic KXPX10M KXPX10M User Guide - Page 98
Printing with a computer
View all Panasonic KXPX10M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Troubleshooting (continued) Problem It takes considerable time for the image to be displayed. It takes considerable time for the initial screen to be displayed. The image is distorted. The remote control does not work. Cause and Remedy • It may take some time until the image is displayed, depending on the image format or size of the image. This is not a malfunction. • Do you have many images stored on the memory card? It may take some time until the image is displayed. This is not a malfunction. • Is the printer located close to any devices that may be emitting electric waves or magnetic waves? Make sure the printer is not set close to any game devices, stereo speakers or large format monitors, etc. • Are there any obstacles between the printer and the remote control? Remove any obstacles that may be in the way. • Are you pointing the remote control at the remote control receiver on the printer? Make sure that you are aiming the remote control at the printer's remote control receiver. • Is the battery used up? Replace the battery with new one. Page - - 10 17 17 16 Printing (with a computer) Problem Cause and Remedy • Don't know how to stop the printing process when printing from a computer. • Printing has started after starting the computer. • Click [Cancel Printing] on the status monitor. • Select [Start] ĺ [Printers and Faxes] (or [Start] ĺ [Settings] ĺ [Printers]) and then double-click the icon for this printer. Then select [Printer] ĺ [Cancel All Documents] (or [Purge Print Documents]). • Cannot start printing from the computer. • ERROR lamp on the printer is lit or blinking when printing from the computer. • Check the information displayed on the status monitor. Page 89 - 89 100 101 98