Panasonic KXTG5202 5.8 Ghz Exp.crdless Phone Sys
Panasonic KXTG5202 - 5.8 GHZ EXP.CRDLESS PHONE SYS Manual
 |
View all Panasonic KXTG5202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic KXTG5202 manual content summary:
- Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 1
5.8 GHz Expandable Cordless Phone System Operating Instructions Model shown is KX-TG5200. Model No. KX-TG5200 KX-TG5202 Pulse-or-tone dialing capability The unit is Caller ID compatible. To display the Caller's name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 2
your new Panasonic cordless telephone. Please read the IMPORTANT SAFETY INSTRUCTIONS on page 65 before use. Read and understand all instructions. Caller ID, Call Waiting and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID this phone will display - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 3
TGA520. • The included handset is pre-registered at the factory and assigned the extension number 1. For KX-TG5202 users KX-TG5202 includes two handsets, one charger unit and one base unit. You can expand the system by adding up to 2 accessory handsets, sold separately. A maximum of 4 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 4
. 32 Chain Dial 33 Editing an Item in the Phone Book 34 Erasing an Item in the Phone Book 34 Copying Items in the Phone Book 35 Intercom 37 Intercom between Handsets . . 37 Transferring a Call 38 Conference Calls 39 Call Share 39 Voice Mail Service 40 Storing a Voice Mail Access Number 40 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 5
-registering the Handset . . . 53 If the Following Appear on Your Display 55 Troubleshooting 57 openLCR Service for Caller IQ 61 Turning on or off Caller IQ Feature 61 Downloading Data 62 Important Safety Instructions 65 FCC and Other Information . . . 67 Specifications 70 Index 71 Warranty - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 6
MH) battery. Charge the battery for 6 hours before initial use (p. 11). AND (KX-TG5202 only) Base unit location/Noise Calls are transmitted between the base unit and handset using If you use the handset near another cordless phone's base unit, noise may be heard. Move away from the other cordless - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 7
Location of Controls Base unit Antenna (p. 6) Antenna (p. 6) Charge Contacts (p. 12) Preparation Telephone System Answering System Useful Information CHARGE Indicator (p. 11) IN USE Indicator (p. 23) LOCATOR and [ ]) VM Indicator (p. 42) Buttons (p. 43) Handset Back side Speaker Ringer/ - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 8
Location of Controls Charger unit (KX-TG5202 only) Charge Contacts (p. 12) CHARGE Indicator (p. menu, the Caller List and the phone book. Increases [B] or decreases [d] the handset ringer and receiver/speaker volumes. Throughout these Operating Instructions, the handset navigator key is indicated - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 9
is displayed if it has been registered to the base unit (p. 3, 53, 54). 7 The display shows the dialed number, call status, programming options, phone book items, Caller ID information, etc. 8 The icons on the bottom line indicate the functions of the corresponding soft keys which are located - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 10
not support Caller ID and voice mail services, you cannot access those services. • This unit will not function during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using the Panasonic KX-J66 T-adaptor. Charger unit (KX-TG5202 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 11
" is displayed. • When the battery is fully charged, "Charge completed" is displayed if there are no new calls in the Caller List. AND (KX-TG5202 only) CHARGE Indicator Battery strength You can confirm the battery strength on the handset display. Battery strength is indicated by the icons shown in - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 12
, the battery may need to be replaced. Please order a new Panasonic HHR-P104 battery at the telephone number shown on page 2. To receive incoming calls for up to 11 days (if no phone calls are made). Battery power is consumed whenever the manually, battery operating time may be shortened (p. 22). 12 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 13
any time by pressing [OFF]. • If you do not press any buttons for 60 seconds, the unit will exit programming mode. • If the unit detects a problem, an error message will be displayed (p. 55-56) and/or error beeps will sound. For assistance, please call: 1-800-211-PANA(7262) 13 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 14
call. p. 46 * View Info.? p. 64 Get new Info.? p. 63 Turn CIQ off? p. 61 Copy phone book Copy 1 item p. 35 Copy all items p. 36 *"Activate CIQ?" is displayed if you have not subscribed to openLCR service. "Turn CIQ on?" is displayed when Caller IQ is turned off (p. 61). Initial setting - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 15
read, change the display language again using direct commands (p. 51). Dialing Mode Handset If you have touch tone service, set the dialing mode to "Tone". For rotary or pulse service, set to "Pulse". The factory preset is "Tone". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 16
Auto Talk Handset The Auto Talk feature allows you to answer calls by simply lifting the handset off the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). You do not need to press [C] or [s]. The factory preset is OFF. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 17
Preparation Telephone System Answering System Useful Information Programmable Settings Ringer Volume Handset You can set the handset ringer volume to high, medium, low, or off. The factory preset is HIGH. If set to off, the handset will ring at the low level for intercom calls, and will not ring - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 18
ringer tone for intercom calls. • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive you answer the call, or - another person answers the call using another phone connected on the same line. 1 Press [MENU]. 2 Press the soft key - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 19
Preparation Programmable Settings LCD Contrast Handset There are 6 levels of LCD contrast. The factory preset is "level 3". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting LCD contrast 3 Scroll to "LCD contrast" by - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 20
place the handset on the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). [ ] To have a hands-free phone [ ] conversation Soft Keys [OFF] [B], [d] 1 Press [s]. • "SP-phone" is displayed. 2 Dial a phone number. • The dialed number is displayed. • After a few seconds, the - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 21
]. To redial using the redial list (Memory Redial) The last 5 phone numbers dialed are stored in the redial list. 1. Press [REDIAL]. • Another handset user can also take the call by pressing [C] or [s]. • If another phone is connected on the same line (p. 10), you can also take the call by lifting - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 22
Voice Enhancer Technology Panasonic's Voice Enhancer Technology turn this feature on or off manually. 1. Press [MENU] during an outside call. 2. Press [2] to select "2=Booster on" or "2=Booster off". 1=Phone book 2=Booster on 3=Caller IQ (for KX-TG5202 or accessory handset users, p. 3). 22 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 23
If the Auto Talk feature is turned on (p. 16), you can answer a call by simply lifting the handset off the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). Temporary ringer off While the handset is ringing for an outside call, you can turn the ringer off temporarily by pressing - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 24
from one of the same phone numbers stored in the phone book, the handset will show the caller's name stored in the phone book instead of incoming caller's connected to a PBX which does not support Caller ID, you cannot access Caller ID service. • Name display service may not be available in some - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 25
the 1st call is deleted. The unit will also tell you how many calls you missed while you were out or unavailable to answer the phone. 10 missed calls 1 1 The display will show the number of calls you missed. C I D PLAY C 2 Stands for Caller ID 2 Press the soft key ( C I D ), [d], or [B] to - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 26
List Handset 1 Press the soft key ( C I D ), [d], or [B] to enter the Caller List. 2 Scroll to the desired caller by pressing [d] or [B]. 3 Press [C] or [s]. • The phone number is dialed. • In some cases, you may have to edit the number before dialing (p. 27). (Ex. You may have to delete "1" and the - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 27
Once you call back an edited number, this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time Caller ID Number Auto Edit feature is turned on (factory preset is on), phone numbers with the same area code as the number you edited will now be - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 28
up to 4 area codes to be edited according to patterns F and G. When more than 5 area codes are edited, older area codes are reset to pattern H. Phone numbers from the 4 most recently edited area codes will be automatically edited. You can turn this feature on or off using the handset. The factory - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 29
storing other items, repeat from step 2. • To exit programming mode, press [OFF]. • You cannot store Caller List items in the phone book if a phone number is not displayed. Erasing Caller Information Handset To erase a specific caller To erase all entries 1 Press the soft key ( C I D ), [d], or - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 30
to 32 digits. • To delete a digit, press the soft key ( CLEAR ). To erase all of the digits, press and hold the soft key ( CLEAR ). Enter phone no. 5557654321| d=Next 5 Press [d]. • If you want to change the name, press the soft key ( EDIT ). The display returns to step 3. Change the name. • If - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 31
Preparation Telephone System Advanced Operation Useful Information Phone Book Selecting characters to enter names Enter names using the dialing buttons. Press each button until the desired character is displayed. • Pressing each button selects a - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 32
soft key ( SEARCH ) to view the first item. 2 Scroll to the desired item. To scroll down, press [d]. To scroll up, press [B]. Phone book items are sorted in the following order: 1 Alphabet letters (Alphabetical) 2 Space 3 Numbers 0 to 9 4 # ; 5 Telephone numbers (If no name is stored - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 33
stored in the phone book, then manually or automatically dial your PIN and then automatically dial the destination from the phone book. Ex. ( CALL ). • The phone number is dialed. • If required, repeat steps 1 to 4 for any remaining numbers. • If you have rotary or pulse service, you need to press - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 34
to change the name, press [d] then go to step 5. • To move the cursor, press the soft key ( f ) or ( g ). Enter name Jane Walke|r d=Next 5 Edit the phone number, then press [d]. • If you do not need to change the number, press [d] then go to step 6. • To delete a digit, press the soft key ( CLEAR - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 35
. • After the copy has started, do not place your handset on the base unit or charger (for KX-TG5202 or accessory handset users, p. 3) until copying finishes, otherwise copying will stop. To copy one phone book item to another handset Make sure the destination handset is not in use. 1 Press [MENU - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 36
book to another handset Make sure the destination handset is not in use. 1 Press [MENU]. 2 Scroll to "Copy phone book" by pressing [d] or [B], then press the soft key ( SELECT ). Copy phone book Copy all items 3 Scroll to "Copy all items" by pressing [d] or [B], then press the soft key ( SELECT - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 37
Auto Talk feature is turned on (p. 16), you can also answer a page by simply lifting the handset off the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). During an intercom call: • You can switch to the speaker by pressing [s]. To switch back to the receiver, press [C]. • If - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 38
a page by simply lifting the handset off the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). • Any user can answer a transferred call within 60 seconds after you hang up, your phone will ring and the call will be returned to your phone. You may speak to the caller again by - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 39
Preparation Telephone System Advanced Operation Useful Information Conference Calls While you are talking with an outside caller, a handset user can join the conversation and establish a conference call. Handset 1 During a call, press [HOLD/INTERCOM]. • The call is put on hold. 2 To page another - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 40
offered by your telephone company. If you subscribe to this service, your telephone company's voice mail system can answer calls for you when you are unavailable to answer the phone or when your line is busy. Callers can leave messages that are saved in virtual voice mailboxes, which are maintained - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 41
hang up or after the phone stops ringing, your unit will seize the phone line and check if a you do not subscribe to a voice mail service, - your telephone company does not send a series , consult your local telephone company or contact the Panasonic Customer Call Center. 1 Press [MENU]. 2 Scroll - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 42
Service , see page 40. 2 Follow the pre-recorded instructions. Voice Mail VM 3 When finished, press [OFF go out. • If your voice mail service uses a voice mail tone and the recorded service uses a voice mail tone, the tone will be heard from any parallel connected phone. If you use another phone - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 43
by pressing any button except [d] or [B]. Telephone System Advanced Operation Useful Information Muting Your Conversation Handset During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Press the soft key ( MUTE - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 44
To return to the first caller, press [FLASH/CALL WAIT] again. • Call Waiting service cannot be used when the first call is put on hold. • If this function tone while talking, the display shows the caller's name with the phone number and "Waiting". BROWN,NANCY 1-555-666-7777 ----Waiting----- • - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 45
21), or storing numbers in the phone book (p. 30). Ex. Line access number [9] (PBX) [9] N Soft key ( PAUSE ) N Phone number • Pressing the soft key host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 46
Special Features Incoming Call Tone Handset During an intercom call (p. 37), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 47
arrow (2). B A Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2. Connecting an - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 48
Wall Mounting Base unit This unit can be mounted on a wall phone plate. 1 Connect the AC adaptor. To Power Outlet 2 Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the telephone line cord (B). 1 2 3 Insert the - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 49
Preparation Wall Mounting 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Connect the telephone line cord. Mount the unit, then slide it down. • Raise the antennas. Telephone System Answering System Useful Information 6 To - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 50
Wall Mounting To remove the wall mounting adaptor While pushing down the RELEASE LEVERS (A), remove the adaptor (B). 1 1 RELEASE LEVERS 2 Charger unit (KX-TG5202 only) The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (see below). Mount the charger - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 51
IQ on *3 [7] [5] *5 [1] : On [0] : Off Go to Step 4 on page 64. Go to Step 4 on page 63. Copy phone book -Copy 1 item [#] [1] Go to Step 4 on page 35. Copy phone book -Copy all items [#] [2] Go to Step 4 on page 36. LCD contrast [0] [1] [1]-[6] : Level 1-6 Key tone [0] [2] [1] : On - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 52
Direct Commands Menu item Command Selection items Message alert [0] [#] [1] : On [0] : Off Handset registration [0] [0] [1] Go to Step 5 on page 54. Handset deregistration [0] [0] [2] [3] [3] [5] Page p. 19 - p. 52 During programming: When " SAVE " or " O K " is displayed, press the right - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 53
Preparation Telephone System Answering System Useful Information Canceling Registration/Re-registration 5 Press [3][3][5] to delete the registration memory. • If you enter a wrong code, re-enter [3][3][5]. Deregistration Enter code:335 :335 6 Press the soft key ( O K ). • The registration - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 54
base unit. • If "Wrong handset Refer to manual" is displayed, the handset you tried to register is not for this base unit. This number from the previous base unit, see the base unit's Operating Instructions. For the KX-TG5200 or KX-TG5202 base unit: (1) Press and hold LOCATOR [ ] until the - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 55
button was pressed while the handset was on the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). Lift the handset and press the button register/deregister. Try again later. • Another handset tried to send phone book items to you but copying stopped. Have the other handset user - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 56
registered. Wrong handset Refer to manual 56 Cause & Remedy • When you tried to store an item in the phone book, the phone book memory was full. Press unit. Erase the handset's registration from the base unit. For the KX-TG5200 or KX-TG5202 base unit: (1) Press and hold LOCATOR [ ] until the CHARGE - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 57
Preparation Telephone System Answering System Useful Information Troubleshooting If the handset display shows error messages, see "If the Following Appear on Your Display..." (p. 55-56) for the Cause & Remedy. Problem "No link to base. Move closer to base and try again." is displayed and an alarm - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 58
Troubleshooting Problem long distance calls. • Please make sure you have long distance service. • Check if Caller IQ feature is turned on. Turn Caller the wall jack. The handset cannot automatically edit the Caller List/incoming phone numbers. • The Caller ID Number Auto Edit feature is turned off. - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 59
is connected properly (p. 47). • If "SP-phone" is displayed on the handset, press [C] to switch to the headset. If you cannot solve your problem • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call our customer call center - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 60
Troubleshooting openLCR service for Caller IQ Problem Cause & Remedy When you try to download the data from openLCR, the voice prompt is not announced from the handset while "Listen & follow phone guidance." is being displayed. • Check the settings (p. 10-12). • Dialing to openLCR may have been - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 61
regarding the openLCR service, call openLCR's customer service department at 1-866-openLCR(1-866-673-6527). • NEITHER PANASONIC COMMUNICATIONS CO., Turning on or off Caller IQ Feature Handset After the first download to your phone, Caller IQ features are automatically turned on. If you wish, you can - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 62
openLCR Service for Caller IQ Downloading Data You can download the following data to your unit from the openLCR web site. • Phone book data 3 Follow the on-screen instructions. Phone book data: • To create the phone book data, enter a name of up to 16 characters, and a phone number of up to 32 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 63
new Info.? Listen & follow phone guidance. 4 Follow the voice prompt to start downloading. • If you have rotary or pulse service, you need to press -hook. DO NOT PLACE the handset on the base unit or charger (for KX-TG5202 or accessory handset users, p. 3). Placing the handset on the base unit or - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 64
page 63). • You cannot access the openLCR server if a telephone or fax machine on the same phone line is in use simultaneously. • While the unit is downloading data from openLCR, the Call Waiting Service cannot be used. To use downloaded melodies as the ringer tone The melody(ies) you download - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 65
or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit not disassemble this unit. Take the unit to an authorized servicenter when service is required. Opening or removing covers may expose you to dangerous - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 66
overheat and cause burns. 5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. • The AC - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 67
. If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Servicenter or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 68
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is as defined by the FCC in 47 CFR Section 68.316. When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 69
regulations posted in the area instruct you not to do trouble - disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 70
(4 7/32" x 8 15/32" x 5 5/16") Approx. 340 g (0.75 lb.) N Charger (KX-TG5202 only) Power Supply: AC adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 0.8 W Maximum notice. Energy Star: As an ENERGY STAR® Participant, Panasonic has determined that this product meets the ENERGY STAR - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 71
tone 44 − Caller ID number auto edit . . 27, 28 Caller ID service 24 Caller IQ 61 Caller List, editing 27 Caller List, erasing 29 Caller List − Clarity booster 22 CONF (Conference 39 Conference calls 39 − Copy phone book 35 D Deregistration 52 Dialing mode 15 Direct commands 51, 52 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 72
off 17, 23 Ringer tone 18 Ringer volume 17 Rotary service, tone dialing . . . . . 44 S Safety instructions 65 Shipping product for service Back cover Soft keys 8 Specifications 70 SP-phone 20 T − Transferring a call 38 Troubleshooting 57 TTY 2, 74, Back Cover V VE (Voice Enhancer 22 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 73
✄ 73 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 74
74 - Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 75
- Panasonic KXTG5202 | 5.8 Ghz Exp.crdless Phone Sys - Page 76
For product service • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call us at: and adequately insured. • Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
5.8 GHz Expandable Cordless Phone System
Operating Instructions
Model No.
KX-TG5200
KX-TG5202
Pulse-or-tone dialing capability
The unit is Caller ID compatible. To display the Caller’s name and phone
number, you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Charge the battery for 6 hours before initial use.
Model shown is KX-TG5200.