Panasonic KXTG5202 5.8 Ghz Exp.crdless Phone Sys - Page 54
Handset [2], Registered
View all Panasonic KXTG5202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Canceling Registration/Re-registration 5 Base unit: Press and hold LOCATOR or [ ] for 3 seconds. • The CHARGE indicator flashes. After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 6 Handset: (1) Press the soft key ( O K ). (2) Wait until a long beep sounds and the display shows the new extension number (ex. extension number 2). • Registration is complete. Press LOCATOR on base unit for 3 sec. Then press OK BOX 1 BOX 2 O K IN USE SPIPRIVACY1[2] Handset [2] Registered • You can stop registration by pressing [OFF] on the handset and pressing LOCATOR or [ ] on the base unit. • If "Wrong handset Refer to manual" is displayed, the handset you tried to register is not for this base unit. This handset is for KX-TG6500 base unit. The accessory handsets for this base unit are KX-TGA520 and KX-TGA523. To order, see page 3. If you have not canceled the handset's registration at the previous base unit (p. 52), the handset number remains in that base unit's memory. To erase the handset number from the previous base unit, see the base unit's Operating Instructions. For the KX-TG5200 or KX-TG5202 base unit: (1) Press and hold LOCATOR [ ] until the CHARGE indicator flashes, and (2) Press and hold LOCATOR or [ ] for the handset that you do not want until the CHARGE indicator flashes rapidly. When the indicator stops flashing, the handset number is erased. 54