Panasonic KXTG5202 5.8 Ghz Exp.crdless Phone Sys - Page 58

Troubleshooting Problem Cause & Remedy You cannot program any function items. • Programming is not possible while the handset and/or base unit is being used. • Do not pause for over 60 seconds while programming. • Walk closer to the base unit. While programming or searching, the handset starts to ring and the program/ search stops. • A call is coming in. To answer the call, press [C] or [s]. Start again from the beginning after hanging up. You cannot make an intercom/ outside call. • If more than one other user is using the handset and/or base unit, you may not be able to make a call. Try again later. • The handset you called is too far from the base unit. You cannot redial. • If the last number dialed was more than 48 digits long, the number will not be redialed correctly. You cannot make long distance calls. • Please make sure you have long distance service. • Check if Caller IQ feature is turned on. Turn Caller IQ feature off (p. 61). The handset does not display the caller's name and/or phone number. • You need to subscribe to Caller ID. • Other telephone equipment may be interfering with your phone. Disconnect it and try again. • Other electrical appliances connected to the same outlet may be interfering with Caller ID. • Telephone line noise may be affecting Caller ID. • The caller requested not to send his/her Caller ID information (p. 24). • If a call is being transferred to you, the Caller ID information will not be displayed. • If a (separate) Caller ID box is connected between the base unit and the telephone wall jack, disconnect the Caller ID box or plug the unit directly into the wall jack. The handset cannot automatically edit the Caller List/incoming phone numbers. • The Caller ID Number Auto Edit feature is turned off. Turn it on (p. 28) and try again. • You need to press [C] or [s] after editing the number. 58