Panasonic NN-SD654W NN-SD654 Owner's Manual - Page 29
befOre RequestinG Service, THese tHinGs are nOrmal
View all Panasonic NN-SD654W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
before requesting service these things are normal: The oven causes interference with my TV. Some radio and TV interference might occur when you cook with the microwave oven. This interference is similar to the interference caused by small appliances such as mixers, vacuums, blow dryers, etc. It does not indicate a problem with your oven. Steam accumulates on the oven door and warm air comes from the oven vents. During cooking, steam and warm air are given off from the food. Most of the steam and warm air are removed from the oven by the air which circulates in the oven cavity. However, some steam will condense on cooler surfaces such as the oven door. This is normal. After use, the oven should be wiped dry (see page 26). ProbleM Oven will not turn on. Oven will not start cooking. The Glass Tray wobbles. When the oven is operating, there is noise coming from the glass tray. The symbol " " appears in the display Window. The oven stops cooking and "H00", "H97" or "H98" appears in the display window. Possible cause reMedy The oven is not plugged in Remove plug from outlet, wait securely. 10 seconds and re-insert. Main circuit breaker or main Reset main circuit breaker or fuse is tripped or blown. replace main fuse. There is a problem with the Plug another appliance into the outlet. outlet to check if it is working. The door is not closed completely. Close the oven door securely. start Button was not Press start Button. pressed after programming. Another program is already Press stop/reset Button to entered into the oven. cancel the previous program and enter new program. The program is not correct. Program again according to the Operating Instructions. stop/reset Button has Program oven again. been pressed accidentally. The Glass Tray is not positioned properly on the Roller Ring or there is food under the Roller Ring. Take out Glass Tray and Roller Ring. Wipe with a damp cloth and reset Roller Ring and Glass Tray properly. The Roller Ring and oven bottom are dirty. Clean these parts according to care and cleaning of your Microwave oven (see page 26). The CHILD LOCK was activated by pressing start Button 3 times. Deactivate LOCK by pressing stop/reset Button 3 times. This displaying indicates a Please contact an authorised problem with the microwave Service Center (see page 28). generation system. 27