Panasonic NN-SD775S NN-SD775S Owner s Manual - Page 25

Timer Feature

Page 25 highlights

Timer Feature This feature allows you to program the oven as a kitchen timer. It can also be used to program a standing time after cooking is completed and/or to program a delay start. To Use as a Kitchen Timer: Example: To count down 5 minutes. 1. • Press Timer/Clock once. 2. Time Dial • Set time, using Time Dial to 5 minutes. CAUTION: If oven lamp is lit while using the timer feature, the oven is incorrectly programed. Stop oven immediately and reread instructions. To Set Delay Start: Example: To delay the start of cooking for 5 minutes, and cook at P6 power for 3 minutes. 1. • Press Timer/Clock once. Rotate 3. • Press Start. Time will count down without oven operatings. To Set Stand Time: Example: To cook at P6 power for 3 minutes, with stand time of 5 minutes. 1. • Enter the desired Power level (see page 14 for directions). 2. Time Dial • Set delay time, using Time Select Dial to 5 minutes. Rotate 3. • Enter the desired Power level (see page 14 for directions). Press 5 times 4. Time Dial • Set cooking time, using Time Dial to 3 minutes. Press 5 times 2. Time Dial Rotate 3. 4. Time Dial Rotate 5. • Set cooking time, using Time Select Dial to 3 minutes. • Press Timer/Clock once. • Set stand time, using Time Dial to 5 minutes. • Press Start. Cooking will start. After cooking, stand time will count down without oven operating. Rotate 5. • Press Start. Delay time will count down. Then cooking will start. NOTES: 1. When each stage finishes, a two-beep signal sounds. At the end of the program, the oven will beep five times. 2. If the oven door is opened during Stand Time, Kitchen Timer or Delay Time, the time in the display will continue to count down. 3. Stand time and Delay start cannot be programmed before inverter turbo defrost, sensor or other auto features. This is to prevent the starting temperature of food from rising before defrosting or cooking begins. A change in starting temperature could cause inaccurate results. 4. The maximum programmable time of Standing Time, Kitchen Time or Delay Time is up to 90 minutes 23 '#1"1@&OJOEE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

23
Timer Feature
This feature allows you to program the
oven as a kitchen timer. It can also be used
to program a standing time after cooking is
completed and/or to program a delay start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press
Timer/Clock
once.
2.
Time Dial
Rotate
• Set time, using Time
Dial to 5 minutes.
3.
• Press
Start
.
Time will count down
without oven
operatings.
To Set Stand Time:
Example: To cook at P6 power for 3
minutes, with stand time of
5 minutes.
1.
Press 5 times
• Enter the desired
Power level
(see
page 14 for directions).
2.
Time Dial
Rotate
• Set cooking time, using
Time Select Dial to
3 minutes.
3.
• Press
Timer/Clock
once.
4.
Time Dial
Rotate
• Set stand time, using
Time Dial to 5 minutes.
5.
• Press
Start
.
Cooking will start.
After cooking, stand
time will count down
without oven
operating.
CAUTION:
If oven lamp is lit while using the timer
feature, the oven is incorrectly pro-
gramed. Stop oven immediately and re-
read instructions.
To Set Delay Start:
Example: To delay the start of cooking
for 5 minutes, and cook at
P6 power for 3 minutes.
1.
• Press
Timer/Clock
once.
2.
Time Dial
Rotate
• Set delay time, using
Time Select Dial to 5
minutes.
3.
Press 5 times
• Enter the desired
Power level
(see
page 14 for directions).
4.
Time Dial
Rotate
• Set cooking time, using
Time Dial to 3 minutes.
5.
• Press
Start
.
Delay time will
count down. Then
cooking will start.
NOTES:
1. When each stage
nishes, a two-beep
signal sounds. At the end of the pro-
gram, the oven will beep
ve times.
2. If the oven door is opened during Stand
Time, Kitchen Timer or Delay Time, the
time in the display will continue to count
down.
3. Stand time and Delay start cannot
be programmed before
inverter turbo
defrost, sensor or other auto features.
This is to prevent the starting tempera-
ture of food from rising before defrosting
or cooking begins. A change in starting
temperature could cause inaccurate
results.
4. The maximum programmable time of
Standing Time, Kitchen Time or Delay
Time is up to 90 minutes
F0003BP00AP_En.indd 23
F0003BP00AP_En.indd
23
2015/1/13 13:17:56
2015/1/13
13:17:56