Panasonic PT-RS11KU 12 000lm / SXGA / 3-Chip DLP™ Laser Projector Operat - Page 62

Chapter 3 Basic Operations - Switching on/off the projector Initial setting (date and time) Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE AND TIME]. To set the date and time automatically, refer to "Setting the date and time automatically" (x page 136). 1) Press as to select an item. INITIAL SETTING 7/7 YEAR 20XX MONTH 1 DAY 1 HOUR 12 MINUTE 34 SECOND 56 Please set the date and time of the built-in clock of the projector. MENU SELECT ENTER SET CHANGE 2) Press qw to switch the setting. 3) Press the button. ffConfirm the setting value and complete the initial setting. Making adjustments and selections It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted. 2) 1) 5) 7) 8) 9) 3) 2) 1) 8) 5) 3) 6) 7) 9) 4) 6) 1) Press the button to roughly adjust the focus of the image. (x page 64) 2) Change the setting of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the installation mode. (x page 34) ffRefer to "Navigating through the menu" (x page 76) for the operation of the menu screen. 3) Press the input selection button (, , , , , , or ) to select the input signal. 4) Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 45) 5) Press the button to adjust the image position. 6) If the input signal is the analog RGB signal or the DVI‑D/HDMI signal, press the button. 7) Press the button to adjust the image size to match the screen. 8) Press the button again to adjust the focus. 9) Press the button again to adjust the zoom and the image size to match the screen. 62 - ENGLISH