Panasonic PT-RS11KU 12 000lm / SXGA / 3-Chip DLP™ Laser Projector Operat - Page 70
Operating with the remote control, Switching the input
View all Panasonic PT-RS11KU 12 000lm / SXGA / 3-Chip DLP™ Laser Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 3 Basic Operations - Operating with the remote control Operating with the remote control Switching the input The input for projection can be switched. Method to switch the input is as follows. ffPress the input selection button and directly specify the input to project. ffDisplay the input selection screen and select the input to project from the list. button Switching the input directly The input for projection can be switched by directly specifying it. 1) Press the input selection button (, , , , , , , ). ffThis operation can be also performed using the buttons on the control panel. Switches the input to RGB1. Switches the input to RGB2. Switches the input to DIGITAL LINK. Switches the input to DVI‑D. Switches the input to HDMI. Switches the input to SDI1 or SDI2. Switches to the other input when one input has already been selected. Also, input selection can be fixed to SDI1 or SDI2 using the [SECURITY] menu → [CONTROL DEVICE SETUP]. 70 - ENGLISH