Panasonic PV GS12 Digital Video Camcorder - Page 33
Image Stabilizer Function, Fade In/out Functions, Backlight Compensation Function
UPC - 037988977727
View all Panasonic PV GS12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Recording Mode Image Stabilizer Function If the Camcorder is shaken while recording, the camera shake in the image can be corrected. ≥If the Camcorder shakes too much, the images may not be stabilized. 1 Set [TAPE RECORDING MENU] >> [CAMERA] >> [EIS] >> [ON]. 2 When the image is completely gone, press the Recording Start/Stop Button (42) to start recording. (42) STILL s ENTER i FADE (14) MENU ≥The [EIS] Indication appears. EIS 3 Release the [FADE] Button (18) about 3 seconds after starting recording. ≥The image reappears gradually. Fade Out Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene. 2 Press the Recording Start/Stop Button (42) or [PHOTO SHOT] Button (47) to start recording. PHOTO (47) SHOT (42) To Cancel Image Stabilizer Function Set [TAPE RECORDING MENU] >> [CAMERA] >> [EIS] >> [OFF]. ≥For other notes concerning this item, see -73-. Fade In/Out Functions Fade In Fade In brings out images and sounds gradually from a black screen at the beginning of a scene. 1 Keep pressing the [FADE] Button (18) while recording. (18) STILL s ENTER i FADE ≥The image fades out gradually. 2 When the image is completely gone, press the Recording Start/Stop Button (42) to stop recording. (42) 1 Keep pressing the [FADE] Button (18) during the Recording Pause Mode. (18) STILL s ENTER i FADE ≥The image fades out gradually. 3 Release the [FADE] Button (18). ≥The still picture cannot fade in or fade out. Backlight Compensation Function This prevents the subject from being recorded too darkly when backlit. (Backlight is the light that shines from behind the subject being recorded.) 1 Press the [BACK LIGHT] Button (8). BACK LIGHT (8) -33-