Panasonic PV-GS250 Digital Video Camera - Page 14
FITTING THE LENS CAP, Remove the grip belt. Run the end of - controller
UPC - 037988980062
View all Panasonic PV-GS250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Before using 1 (41) (41) Tripod receptacle This is a hole for attaching the Camcorder to optional tripod. (Please carefully read the operating instructions for how to attach the tripod to the Camcorder.) ≥When the tripod is used, operate the Camcorder from the Magic Wire Remote Control with Narration Mic for convenience. (When not using the remote control, attach the clip to the grip belt for convenience. When you move with remote control attached to a pocket, etc., take care to avoid tipping over the tripod.) ≥You cannot open the card slot cover when the tripod is used. Insert the card first and then attach the tripod. (43) 2 (43) Lens hood In order to remove the lens hood, rotate it counter-clockwise 1. In order to fit it, put into slot 2, and then rotate it clockwise. Fitting the lens cap Fit the lens cap to protect the surface of the lens. 1 Remove the grip belt. Run the end of the lens cap cord through the hole in the grip belt attachment and run the lens cap through the lens cap cord. (42) Shoulder strap fixture ≥The lens cap removed can be attached to the lens cap fixture. (It cannot be hung if the grip belt is used as a hand strap.) (42) 1 3 2 ≥Put the strap through the fixture 1 and through the stopper 2 so it will not come off. Extend part 3 by at least 1 inch (2 cm). ≥Fit the other end of the belt similarly. ≥To fit or remove the lens cap, hold both sides of the lens cap with the tips of your finger and thumb. 14 LSQT0862