Panasonic PV-GS250 Digital Video Camera - Page 29
Recording Still Pictures On A Card While Recording Image Onto A Tape, Check The Recording
UPC - 037988980062
View all Panasonic PV-GS250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Record mode Recording still pictures on a card while recording image onto a tape You can record still pictures while recording image onto a tape. ≥Set to Tape Recording Mode. 1 Press the [PHOTO SHOT] button fully while recording image onto a tape. PHOTO SHOT Check the recording The last image recorded is played back for 2 to 3 seconds. After checking, the Camcorder will be set to a recording pause. ≥Set to Tape Recording Mode. 1 Press the joystick during the recording pause until the icon 1 appears. 2 Move the joystick down to select the recording check icon [ ]. ≥For the number of still pictures to be recorded on a card, refer to -80-. ≥When recording pictures onto a card, the recording start/stop button is disabled. ≥You can select a picture quality for still pictures to be recorded. (-31-) ≥In tape recording mode, the size of pictures that can be recorded is [640]. ≥In order to record higher quality still pictures, you must use the card recording mode. ≥If the wide mode is used, you cannot record images onto the card. ≥The [PHOTO SHOT] button does not work if it is pressed halfway. 1 Blank search function Searches for the last part of the image recorded (unused part of the tape). ≥Set to Tape Recording/Playback Mode. 1 Set [BASIC] or [ADVANCE] >> [BLANK SEARCH] >> [YES]. ª Stopping a blank search midway through Move the joystick down. ≥If the cassette tape has no blank part, then the Camcorder will stop at the end of the tape. ≥The Camcorder stops at a point approx. 1 second before the end of the last image recorded. When you start recording at that point, the image can be recorded seamlessly from the last image. 29 LSQT0862