Panasonic PV-GS250 Digital Video Camera - Page 47

Edit mode ≥For more information, refer to the operating instructions for your TV set and recorder. ≥When you do not need functional indications or date and time indications, press the [OSD] button on the remote control for no indication. (When you connect the Camcorder and a recorder with the DV cable, these indications may not appear.) ª When neither image nor sound from the Camcorder is output to the TV set ≥Check that the plugs are inserted as far as they go. ≥Check the connected terminal. ≥When no image is presented on the TV even if set [BASIC] >> [AV JACK] >> [OUT/Ë], set to [OUT]. (-64-) Recording the contents of other equipment You can dub the contents of other equipment to a DV cassette or card, and can record TV programs. ≥Set to Tape Playback Mode. 1 Connect the Camcorder and other equipment. AV/ [VIDEO OUT] [S-VIDEO OUT] [AUDIO OUT] 1 2 S-VIDEO ≥Connect the Camcorder and other equipment by using the AV cable 1. ≥If the recorder has an S-Video terminal, then also connect an S-Video cable 2 (optional). It allows you to record clearer images. 2 Set [BASIC] >> [AV JACK] >> [IN/OUT]. (Camcorder) 3 Turn the power on and start playback. (Other equipment) 4 Start recording. (Camcorder) Recording on a tape: 5 Set [ADVANCE] >> [REC STDBY] >> [ON]. (Camcorder) (Only when the Tape Recording Mode) ≥The icon appears. Move the joystick up to start recording. Or, while pressing the [¥REC] button on the remote controller, press the [1] button. T ¥REC A.DUB V/REW PLAY FF/W STILL ADV PAUSE STILL ADV W VOL STOP Recording on a card: Press the [PHOTO SHOT] button. 6 Move the joystick of the Camcorder down or press the [∫] button on the remote controller to stop recording. ≥While analog input pictures are being recorded on a tape or when the Camcorder is in recording standby mode, the photoshot recording is disabled. 7 Stop playback. (Other equipment) ≥Do not plug or unplug the cable during recording or the recording may not be completed properly. ≥Carefully read the operating instructions for your TV set and video equipment. ≥By operating as [SETUP] or [ADVANCE] >> [AUDIO REC], set the recording sound mode ([12bit] or [16bit]). (-64-) ≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback. ≥If a picture containing a copyright protection signal (copy guard) is recorded, the message "COPY PROTECTED" appears when recording it on a tape and the picture is distorted by mosaic-like patterns at playback. ≥When wide images are input, the display such as the menu screen or the operation icon is expanded horizontally. ≥If, during recording, an operation such as cue playback or slow motion playback is performed on external equipment, mosaic-like patterns may appear on the picture at playback. ≥If pictures are recorded when TV broadcasting signals are weak or pictures are affected by noise, they may be distorted or may not even be played back. ≥If both the S-Video cable and the AV cable are connected, S-video signal are input preferentially. 47 LSQT0862