Panasonic PVDV203 PVDV203 User Guide - Page 19
Camera, Camera Recording
View all Panasonic PVDV203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Camera Recording Camera Simple Recording Remove the lens cap and clip it to the hand strap. Clip here EVF REC/PAUSE mode POWER Lamp 1, 5 POWER 2Vision Adjustment Control 3MENU Before you begin • Connect the Palmcorder to a power source. (pp. 15, 16) • Insert a cassette with the record tab closed. (p. 7) 1 Set POWER to CAMERA. • The POWER Lamp lights red. • Be sure POWER is fully turned to the CAMERA position. 2 With the Viewfinder Eye Cup held up against your eye, adjust the Vision Adjustment Control to your eyesight. • Adjust the EVF Brightness of the Viewfinder if necessary. Please refer to "To adjust the LCD/ EVF BRIGHTNESS or COLOR" on page 20. 3 Set to REC SPEED "SP" or "LP" in the RECORDING SETUP menu screen. (Menu OSD: p. 108) 4 Press REC/PAUSE to start recording. • "REC" is displayed on the screen. Press REC/PAUSE again to pause recording. 5 Set POWER to OFF when finished. • To remove the cassette, slide TAPE EJECT. • When the Palmcorder is aimed at excessively bright objects, or bright lights, a vertical bar may appear in the picture. This is a normal characteristic of the CCD pick-up device. Try to avoid this whenever possible. 4REC/PAUSE WARNING: • Do not leave the Palmcorder with the EVF aimed directly at the sun as this may cause damage to the internal parts of the EVF. • Do not lift, or carry, the Palmcorder by the EVF or the LCD Monitor. • Do not pull hard on the EVF Eye Cup. To conserve power After 5 minutes, the Record/Pause mode will automatically change to Standby mode. To resume recording, set POWER to OFF and then ON again. 19