Panasonic SAPM16 SAPM16 User Guide - Page 10

Listening operations Before use 2 SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 456 789 PLAY MODE PGM 0 10 CD CLEAR TUNER/ TAPE BAND AUX VOL MUTING VOL REW FF S.SOUND EQ PRESET EQ DISPLAY DIMMER 3 1 TUNER BAND 2 PLAY MODE 3 FF REW 4 VOLUME DOWN UP A SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 1 2 3 456 789 PLAY MODE PGM 0 10 CD CLEAR TUNER/ TAPE BAND AUX VOL MUTING VOL REW FF S.SOUND EQ PRESET EQ DISPLAY DIMMER PLAY MODE The radio: manual tuning 1 Press [TUNER/BAND] to select "FM" or "AM". The unit comes on automatically. Every time you press the button: FM ↔ AM 1 2 Press [PLAY MODE] on the remote control to 4 select "MANUAL". Every time you press the button: MANUAL ↔ PRESET 3 Press [g 4/REW] or [f 3 /FF] to select the frequency of the required station. "ST" is displayed when a stereo FM broadcast is being received. 4 Adjust the volume. Auto tuning Press and hold [g 4/REW ] or [ f 3 /FF] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it finds a station. • Auto tuning may not function when there is excessive interference. • To cancel auto tuning, press [g 4/REW] or [f 3 /FF] once again. A If noise is excessive in FM By remote control only Press and hold [PLAY MODE] to display "MONO". This mode improves sound quality if reception is weak, but broadcasts will be heard in monaural. Press and hold [PLAY MODE] again to cancel the mode. "MONO" goes out. MONO is also cancelled if the frequency is changed. Turn off "MONO" for normal listening. Stereo and monaural broadcasts are automatically played as they are received. FM allocation setting By main unit only By adjusting the allocation, you can enable this tuner to receive FM broadcasts allocated in 0.1 MHz steps. Press and hold [TUNER/BAND]. After a few seconds, the display will change to a flashing display of the current minimum FM frequency. If you continue to hold the button down, the minimum frequency will change. Release the button at this time. To return to the original frequency indication, repeat above. Note • After changing the "allocation" setting, the frequencies you previously preset in the memory will be cleared. • Sound is momentarily interrupted if you load/unload a cassette while listening to an AM broadcast. 10 RQT6683