Panasonic SAPM16 SAPM16 User Guide - Page 19

A STOP , DEMO 2 REC B SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 123 4 5 6 789 PLAY MODE PGM 0 10 CD CLEAR TUNER/ TAPE BAND AUX VOL MUTING VOL REW FF S.SOUND EQ PRESET EQ DISPLAY DIMMER PLAY MODE C STOP , DEMO 2 REC A Recording from the radio Preparation: Do the preparatory steps (\ page 18). 1 Tune to the required station. (\ page 10 or 11) 2 Press [[/ J REC] to start recording. 2 To stop recording Press [STOP L, -DEMO]. To stop recording temporarily Press [[/ J REC]. To resume recording, press [[/ J REC]. To cut an unnecessary part while recording 1. Press [[/J REC] during the unnecessary part. The cassette deck will go into the stop mode. 2. Press [[/ J REC] to resume recording again. To record on the other side of the tape Turn the tape over and press [[/ J REC]. Note When recording an AM broadcast, sound is momentarily interrupted when you start and stop the recording. B To reduce noise while recording an AM broadcast (Beat proof function) By remote control onlyly Press and hold [PLAY MODE] while recording. Every time you press the button: BP1 ↔ BP2 Select the position where there is less noise. Recording operaLtisotnesning operations C Recording CDs You can use 1-DISC/ALL-DISC mode (A page 14) to make recordings. Preparation: • Do the preparatory steps (A page 18). • Insert the CD(s) you want to record (A page 12). 1-DISC/ALL-DISC recording 1 Do steps 1 to 4 on page 14. Ensure CD is stopped. 2 Press [[/ J REC] to start recording. The CD starts. 2 To stop recording Press [STOP L, -DEMO]. CD play stops automatically. To stop recording temporarily Press [[/ J REC]. To resume recording, press [[/ J REC]. If the tape finishes before the CD The CD continues playing. Press [STOP L, -DEMO] to stop it. To record programmed tracks 1 Program the tracks (A page 16). 2 Press [[/ J REC] to start recording. Play starts. To stop recording, press [STOP L, -DEMO]. Disc play stops automatically. 19 RQT6683