Panasonic SAPM16 SAPM16 User Guide - Page 24

Listening operations, Timers and others, Using the play/record timer, Using the sleep timer

Page 24 highlights

Listening operations A SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 123 456 789 PLAY MODE PGM 0 10 CD CLEAR TUNER/ TAPE BAND AUX VOL MUTING VOL REW FF S.SOUND EQ PRESET EQ DISPLAY DIMMER PLAY/ REC CLOCK/ TIMER B SLEEP AUTO OFF SLEEP CLOCK PLAY AUTO OFF TIMER REC DISC 123 456 789 PLAY MODE PGM 0 10 CD CLEAR TUNER/ TAPE BAND AUX VOL MUTING VOL REW FF S.SOUND EQ PRESET EQ DISPLAY DIMMER SLEEP AUTO OFF Timers and others 24 RQT6683 Using the timers A Using the play/record timer By remote control only To check settings While the unit is on and the "rPLAY" (or "rREC") indicator is on, press [CLOCK/TIMER] so "rPLAY" (or "rREC") appears on the display. Two seconds after "rPLAY" (or "rREC") appears, the settings are displayed in the following order: • For play timer 1 Play start time • For record timer 1 Recording start time 2 Play finish time 2 Recording finish time 3 Play source 3 Recording source 4 Playback volume You can check the settings even when the system is OFF by pressing [CLOCK/TIMER] twice. To enjoy the desired source after the timer setting is completed The volume level (for play timer) and music source are stored in the timer memory and the timer will start in these preset conditions. However, the CD numbers do not get stored in the timer memory. 1. After step 4, start playing the desired source. 2. Reset the CD numbers if you have changed any of them, confirm that a CD or cassette is inserted, then press [f] to put the unit on standby. Note • If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. • If the unit is on, the timer will not function. The unit must be in the standby mode. • If AUX is selected as the source, when the timer comes on, the system turns on and engages AUX as the source. If you want to playback or record from a connected unit, set the other unit's timer to the same time. (See the other unit's instruction manual.) B Using the sleep timer By remote control only Set the unit to stop and turn off after a certain time. While enjoying the desired source: Press [SLEEP] to select the desired time. Every time you press the button: SLEEP 30 SLEEP 60 SLEEP 90 SLEEP 120 SLEEP OFF To cancel the sleep timer Press [SLEEP] to select "SLEEP OFF". To confirm the remaining time (only while unit is ON) Press [SLEEP]. The remaining time is shown for about 5 seconds. To change the time remaining during operation Press [SLEEP] to show the remaining time, and then press [SLEEP] to select the desired time. Note • The sleep timer turns OFF automatically the moment you attempt to record a CD. • The play and sleep timer or the record and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

RQT6683
24
Listening operations
Using the timers
A
Using the play/record timer
By remote control only
To check settings
While the unit is on and the “
r
PLAY” (or “
r
REC”) indicator is
on, press [CLOCK/TIMER] so “
r
PLAY” (or “
r
REC”) appears
on the display.
Two seconds after “
r
PLAY” (or “
r
REC”) appears, the settings
are displayed in the following order:
For play timer
For record timer
1
Play start time
1
Recording start time
2
Play finish time
2
Recording finish time
3
Play source
3
Recording source
4
Playback volume
You can check the settings even when the system is OFF by
pressing [CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is
completed
The volume level (for play timer) and music source are stored
in the timer memory and the timer will start in these preset
conditions. However, the CD numbers do not get stored in
the timer memory.
1.
After step 4, start playing the desired source.
2.
Reset the CD numbers if you have changed any of them,
confirm that a CD or cassette is inserted, then press [
f
] to
put the unit on standby.
Note
• If you turn the unit off and on again while a timer is
functioning, the finish time setting will not be activated.
If the unit is on, the timer will not function. The unit must be
in the standby mode.
If AUX is selected as the source, when the timer comes on,
the system turns on and engages AUX as the source. If
you want to playback or record from a connected unit, set
the other unit’s timer to the same time. (See the other unit’s
instruction manual.)
B
Using the sleep timer
By remote control only
Set the unit to stop and turn off after a certain time.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90
SLEEP 30
SLEEP 60
SLEEP 120
SLEEP OFF
To cancel the sleep timer
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time
(only while unit is ON)
Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the time remaining during operation
Press [SLEEP] to show the remaining time, and then press
[SLEEP] to select the desired time.
Note
• The sleep timer turns OFF automatically the moment you
attempt to record a CD.
• The play and sleep timer or the record and sleep timer can
be used together.
The sleep timer always has priority.
Be sure not to overlap
timer settings.
A
B
SLEEP
SLEEP
CLOCK
TIMER
PLAY
REC
A
UTO OFF
UTO OFF
DISC
PLA
Y MODE
Y MODE
MUTING
REW
S.SOUND EQ
S.SOUND EQ
DIMMER
DISPLAY
PRESET EQ
PRESET EQ
FF
1
2
3
4
6
5
7
8
9
PGM
10
VOL
VOL
AUX
TUNER/
BAND
TAPE
0
CLEAR
CLEAR
CD
CLOCK/
TIMER
PLAY/
REC
SLEEP
SLEEP
CLOCK
TIMER
PLAY
REC
A
UTO OFF
UTO OFF
DISC
PLA
Y MODE
Y MODE
MUTING
REW
S.SOUND EQ
S.SOUND EQ
DIMMER
DISPLAY
PRESET EQ
PRESET EQ
FF
1
2
3
4
6
5
7
8
9
PGM
10
VOL
VOL
AUX
TUNER/
BAND
TAPE
0
CLEAR
CLEAR
CD
SLEEP
AUTO OFF
SLEEP
AUTO OFF
Timers and others