Panasonic SC-BTT195 SCBTT190 User Guide - Page 39

[BTT196] [BTT195] Front speaker assembly option It is possible to shorten the height of the front speaker by directly connecting the speaker to the base without using the stand. Preparation Detach the speaker cable from the stand. 1 Thread the detached cable through the base. Preventing the speakers from falling or dropping [BTT196] [BTT195] Preventing from falling Front speaker Preventing from dropping Front speaker, Surround speaker, Center speaker 1 Thread a string to the speaker. ≥ Use a string of less than ‰ 2.0 mm (3/32q), which is capable of supporting over 10 kg (22 lbs). e.g., [BTT196] Front speaker  2 Attach the speaker to the base and tighten the screw (supplied) securely.  A String (not supplied) B Rear of the speaker 2 Thread a string from the wall to the speaker and tie tightly. When placed on the floor   3 Connect the speaker cable to the speaker and to the terminal of the main unit. (> 11, 12) ∫ Reattaching the speaker cable to the stand  When mounted on a wall    Straighten the cable and run through the stand. Pull out the cable through the hole. C Screw eye (not supplied) D Wall E Approx.150 mm (5 29/32q) F Less than 100 mm (3 15/16q) Advanced operations 39 VQT3X51