Panasonic SC-HT56 Home Theater - Page 17
The radio, Select the frequency., Reducing excessive noise
UPC - 037988982295
View all Panasonic SC-HT56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
The radio 1 2 The radio Press [INPUT SELECTOR < or >] Select the frequency. to select "TUNER FM" or "TUNER Auto tuning starts if you press and AM". hold the button. Direct tuning Input the frequency of the station. Remote control 1. Press [TUNER, ―BAND] to select "TUNER". 2. Press and hold [TUNER, ―BAND] to select "TUNER FM" or "TUNER AM". 3. Press [TUNER DIRECT TUNING]. 4. Press the numbered buttons to enter the frequency. e.g. To select 107.9 MHz, press [1] → [0] → [7] → [9] • If you do not press a button while the cursor is flashing, the display returns to the frequency being received. • If the frequency has not been input correctly, "ERROR" will be displayed. Automatic presetting The FM stations the unit can receive are preset in channels 1 to 30. The AM stations the unit can receive are preset in channels 21 to 30 (FM stations are replaced if any were preset in these channels). Preparation: Tune to either FM 87.9 MHz or AM 530 kHz. Main unit 1. Press [-MENU] to select "TUNER" ➡ "AUTO MEMO". 2. Press [TUNE 2 / - or 1 / +] to select "START" ➡ [ENTER]. Select "CANCEL" to cancel. The tuner presets all the stations it can receive into the channels in ascending order. During automatic presetting, the memory indicator (M) flashes and the frequency scrolls. The memory indicator and channel numbers are displayed for a second when a station is preset. The last station to be preset is displayed when presetting finishes. Reducing excessive noise During FM stereo reception You can improve FM reception by switching reception to monaural. Main unit 1. Press [-MENU] to select "TUNER" ➡ "FM MODE". 2. Press [TUNE 2 / - or 1 / +] to select "MONO" ➡ [ENTER]. Select "AUTO" to cancel. Manual presetting Preset the stations one at a time. Preparation: Tune to the station you want to preset. Main unit 1. Press [-MENU] to select "TUNER" ➡ "MEMORY". 2. Press [TUNE 2 / - or 1 / +] to select the channel ➡ [ENTER]. ("STORED" lights.) For your reference FM stations can also be preset in the MONO mode. Selecting channels Remote control 1. Press [TUNER, ―BAND] to select "TUNER". 2. Press [SKIP u, 2 or i, 1]. or Press the numbered buttons. For channels 1 to 9, press the corresponding number. For channels 10 or over, press [ ≧10], then the two digits. e.g. To select channel 21: [ ≧10] → [2] → [1] Main unit 1. Press [-MENU] to select "TUNER" ➡ "TUNE MODE". 2. Press [TUNE 2 / - or 1 / +] to select "PRESET" ➡ [ENTER]. Select "MANUAL" to cancel. 3. After exiting the menu: Press [TUNE 2 / - or 1 / +]. During AM reception When there is a lot of noise interference with an AM broadcast, try switching this mode. RQTX0175 Main unit 1. Press [-MENU] to select "TUNER" ➡ "BEAT PROOF". 17 2. Press [TUNE 2 / - or 1 / +] to select "MODE 1" or "MODE 2" ➡ [ENTER].