Panasonic SC-HT56 Home Theater - Page 21

Reference, Specifications, Remote control operation guide

Page 21 highlights

Remote control operation guide Changing the remote control code Change the code if you find the remote control unintentionally also controls other Panasonic equipment. Do the following to set the remote control code and this unit's remote control mode to the same one. Change the main unit's mode 1. Enter the SETUP menu. MENU SETUP Press and hold . RETURN 2. Select and press [ENTER]. Change the remote control's code 5. Press . 6. While pressing , press and hold for about 2 seconds. 3. Select and press [ENTER]. 4. Press [-MENU, -SETUP, RETURN] repeatedly to select "EXIT" and press [ENTER]. To restore the code to "1" • On the main unit: In step 3, select "1". • On the remote control: In step 6, while pressing [OK], press and hold [1] for about 2 seconds. Specifications (IHF'78) Remote control operation guide/Specifications g AMPLIFIER SECTION RMS Output Power of each channel driven 10 % total harmonic distortion 1 kHz Front CH 1 kHz Surround CH 1 kHz Center CH 100 Hz Subwoofer CH Total RMS Output Power 125 W per channel (3 Ω) 125 W per channel (3 Ω) 250 W per channel (6 Ω) 250 W per channel (6 Ω) 1000 W Rated minimum sine wave RMS power output 1% total harmonic distortion (Dolby Digital mode) 120 Hz to 20 kHz Front CH 53 W per channel (3 Ω) 120 Hz to 20 kHz Surround CH 53 W per channel (3 Ω) 120 Hz to 20 kHz Center CH 133 W per channel (6 Ω) 45 Hz to 120 Hz Subwoofer CH 141 W per channel (6 Ω) Total FTC Output Power 486 W Rated minimum sine wave RMS power output 1% total harmonic distortion (Stereo mode) 120 Hz to 20 kHz Front CH 45 Hz to 150 Hz Subwoofer CH Total FTC Output Power 52 W per channel (3 Ω) 141 W per channel (6 Ω) 245 W Total harmonic distortion half power at 1 kHz (Front CH) Input sensitivity 0.5 % (3 Ω) DVD-P, TV, BD/DVR 450 mV, IHF'66 S/N at rated power DVD-P, TV, BD/DVR 80 dB Input impedance DVD-P, TV, BD/DVR Tone controls BASS 47 kΩ 50 Hz, +6 dB to -6 dB TREBLE 20 kHz, +6 dB to -6 dB Digital input/output: HDMI Input 2 HDMI Output 1 Optical digital input 2 Coaxial digital input 1 Analog input/output Analog audio input Wireless Ready 3 SH-FX67 g OPERATING CONDITION Operating temperature range Operating humidity range g FM TUNER SECTION Frequency range Sensitivity Total harmonic distortion MONO STEREO S/N MONO STEREO Antenna terminal g AM TUNER SECTION Frequency range 0°C to +40°C (+32°F to +104°F) 20% to 80% RH (no condensation) 87.9 MHz to 107.9 MHz 11.2 dBf (2 µV), IHF'58 0.3% 0.4% 64 dB 63 dB 75 Ω (unbalanced) 530 kHz to 1710 kHz g SPEAKER SECTION  Rating with low-cut filter equipped Amplifier Front speaker (SB-HF56) Type Speaker unit Full range Input power (IEC) 1 Way, 1 Speaker 6.5 cm (2 1/2") cone type 125 W (Max/3 Ω) Output sound pressure Frequency range Dimensions (W x H x D) 80 dB/W (1.0 m) 86 Hz to 25 kHz (-16 dB) 98 Hz to 22 kHz (-10 dB) 92 mm x 272 mm x 95 mm (3 5/8" x 10 23/32" x 3 3/4") Weight 0.74 kg (1.6 lb.) Surround speaker (SB-HS760) Type Speaker unit Full range Input power (IEC) Output sound pressure level Frequency range Dimensions (W x H x D) 1 Way, 1 Speaker 6.5 cm (2 1/2") cone type 125 W (Max/3 Ω) 80 dB/W (1.0 m) 95 Hz to 25 kHz (-16 dB) 120 Hz to 22 kHz (-10 dB) 92 mm x 142 mm x 95 mm (3 5/8" x 5 19/32" x 3 3/4") Weight 0.6 kg (1.32 lb.) Center speaker (SB-HC760) Type Speaker unit Full range Input power (IEC) Output sound pressure level Crossover frequency Frequency range Dimensions (W x H x D) Weight 2 Way, 2 Speakers 6.5 cm (2 1/2") cone type x 2 250 W (Max/6 Ω) 82 dB/W (1.0 m) 5 kHz 80 Hz to 25 kHz (-16 dB) 96 Hz to 22 kHz (-10 dB) 270 mm x 94 mm x 95 mm (10 5/8" x 3 11/16" x 3 3/4") 1.3 kg (2.9 lb.) Subwoofer (SB-HWX50) Type Speaker unit (Woofer) Input power IEC 1 Way, 1 Speaker 16 cm (6 1/2") cone type 250 W (Max/6 Ω) Output sound pressure level 78 dB/W (1.0 m) Frequency range Dimensions (W x H x D) Weight 35 Hz to 200 Hz (-16 dB) 40 Hz to 198 Hz (-10 dB) 181 mm x 361 mm x 315 mm (7 1/8" x 14 7/32" x 12 13/32") 4.7 kg (10.4 lb.) g GENERAL Power supply Power consumption Dimensions (W x H x D) Weight AC 120 V, 60 Hz 125 W 430 mm x 105 mm x 388 mm (16 15/16" x 4 1/8" x 15 9/32") 4 kg (8.8 lb.) RQTX0175 Power consumption in standby mode: HDMI On: HDMI Off: 0.7 W 0.3 W Notes: 21 1. Specifications are subject to change without notice. 2. Total harmonic distortion is measured by the digital spectrum analyzer.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

21
RQTX0175
Remote control operation guide/Specifications
Changing the remote control code
Change the code if you find the
remote control unintentionally also
controls other Panasonic equipment.
Do the following to set the remote
control code and this unit’s remote
control mode to the same one.
Change the main unit’s mode
Change the remote control’s code
To restore the code to “1”
On the main unit: In step 3, select
“1”
.
On the remote control: In step 6, while
pressing [OK], press and hold [1] for about
2 seconds.
1. Enter the SETUP menu.
Press and hold
.
2. Select and press [ENTER].
3. Select and press [ENTER].
4. Press [-MENU, –SETUP, RETURN]
repeatedly to select “EXIT” and
press [ENTER].
MENU
RETURN
SETUP
5. Press
.
6. While pressing
, press and
hold
for about 2 seconds.
Remote control operation guide
Specifications (IHF’78)
g
AMPLIFIER SECTION
RMS Output Power of each channel driven
10 % total harmonic distortion
1 kHz Front CH
125 W per channel (3
)
1 kHz Surround CH
125 W per channel (3
)
1 kHz Center CH
250 W per channel (6
)
100 Hz Subwoofer CH
250 W per channel (6
)
Total RMS Output Power
1000 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Dolby Digital mode)
120 Hz to 20 kHz Front CH
53 W per channel (3
)
120 Hz to 20 kHz Surround CH
53 W per channel (3
)
120 Hz to 20 kHz Center CH
133 W per channel (6
)
45 Hz to 120 Hz Subwoofer CH
141 W per channel (6
)
Total FTC Output Power
486 W
Rated minimum sine wave RMS power output
1% total harmonic distortion (Stereo mode)
120 Hz to 20 kHz Front CH
52 W per channel (3
)
45 Hz to 150 Hz Subwoofer CH
141 W per channel (6
)
Total FTC Output Power
245 W
Total harmonic distortion
half power at 1 kHz (Front CH)
0.5 % (3
)
Input sensitivity
DVD-P, TV, BD/DVR
450 mV, IHF'66
S/N at rated power
DVD-P, TV, BD/DVR
80 dB
Input impedance
DVD-P, TV, BD/DVR
47 k
Tone controls
BASS
50 Hz, +6 dB to -6 dB
TREBLE
20 kHz, +6 dB to -6 dB
Analog input/output
Analog audio input
3
Wireless Ready
SH-FX67
g
OPERATING CONDITION
Operating temperature range
0°C to +40°C (+32°F to +104°F)
Operating humidity range
20% to 80% RH (no condensation)
g
FM TUNER SECTION
Frequency range
87.9 MHz to 107.9 MHz
Sensitivity
11.2 dBf (2 µV), IHF'58
Total harmonic distortion
MONO
0.3%
STEREO
0.4%
S/N
MONO
64 dB
STEREO
63 dB
Antenna terminal
75
(unbalanced)
g
AM TUNER SECTION
Frequency range
530 kHz to 1710 kHz
g
SPEAKER SECTION
Rating with low-cut filter equipped Amplifier
Front speaker
(SB-HF56)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type
Input power (IEC)
125 W
(Max/3
)
Output sound pressure
80 dB/W (1.0 m)
Frequency range
86 Hz to 25 kHz (-16 dB)
98 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 272 mm x 95 mm
(3
5
/
8
" x 10
23
/
32
" x 3
3
/
4
")
Weight
0.74 k
g
(1.6 lb.)
Surround speaker (SB-HS760)
Type
1 Way, 1 Speaker
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type
Input power (IEC)
125 W
(Max/3
)
Output sound pressure level
80 dB/W (1.0 m)
Frequency range
95 Hz to 25 kHz (-16 dB)
120 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
92 mm x 142 mm x 95 mm
(3
5
/
8
" x 5
19
/
32
" x 3
3
/
4
")
Weight
0.6 k
g
(1.32 lb.)
Center speaker (SB-HC760)
Type
2 Way, 2 Speakers
Speaker unit
Full range
6.5 cm (2
1
/
2
") cone type x 2
Input power (IEC)
250 W
(Max/6
)
Output sound pressure level
82 dB/W (1.0 m)
Crossover frequency
5 kHz
Frequency range
80 Hz to 25 kHz (-16 dB)
96 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D)
270 mm x 94 mm x 95 mm
(10
5
/
8
" x 3
11
/
16
" x 3
3
/
4
")
Weight
1.3 k
g
(2.9 lb.)
Subwoofer (SB-HWX50)
Type
1 Way, 1 Speaker
Speaker unit (Woofer)
16 cm (6
1
/
2
") cone type
Input power IEC
250 W (Max/6
Ω)
Output sound pressure level
78 dB/W (1.0 m)
Frequency range
35 Hz to 200 Hz (-16 dB)
40 Hz to 198 Hz (-10 dB)
Dimensions (W x H x D)
181 mm x 361 mm x 315 mm
(7
1
/
8
" x 14
7
/
32
" x 12
13
/
32
")
Weight
4.7 k
g
(10.4 lb.)
g
GENERAL
Power supply
AC 120 V, 60 Hz
Power consumption
125 W
Dimensions (W x H x D)
430 mm x 105 mm x 388 mm
(16
15
/
16
" x 4
1
/
8
" x 15
9
/
32
")
Weight
4 k
g
(8.8 lb.)
Power consumption in standby mode:
HDMI On:
0.7 W
HDMI Off:
0.3 W
Notes:
1.
Specifications are subject to change without notice.
2.
Total harmonic distortion is measured by the digital spectrum analyzer.
Digital input/output:
HDMI Input
2
HDMI Output
1
Optical digital input
2
Coaxial digital input
1