Panasonic SCHTB15 SCHTB15 User Guide - Page 16

Connect the speaker cables. ≥ Insert the wire fully, taking care not to insert beyond the wire insulation.  Insert the wire fully. r: White s: Blue line  Pull the cable straight along the line and slide into the groove. ≥ Be sure to place the cable under the projecting part. Push  Press into the groove. Back of the base Speaker fall prevention measures To prevent the speakers from falling, it is recommended to attach the speakers to the wall or table with a fall prevention cord (hereafter "cord"). ≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers. ≥ Use a cord of less than ‰2.0 mm (5/64q), which is capable of supporting over 10 kg (22.05 lbs). ≥ Keep the screws out of reach of children to prevent swallowing. ≥ Make sure that the slack of the cord is minimal. When placing the speakers on a wall Horizontal placement      Vertical placement   16 A Cord (not supplied) B Screw eye (not supplied) VQT3Q59     C Wall D TV