Panasonic SCPT1050 SCPT1050 User Guide - Page 23

Other Settings Play Speed [DVD-VR] [DVD-V] To change play speed - from "k0.6" to "k1.4" ≥ Press [1 PLAY] to return to normal play. ≥ After you change the speed - Dolby Pro Logic II has no effect. - Audio output switches to 2-channel stereo (except when Surround Music is on). - Sampling frequency of 96 kHz is converted to 48 kHz. ≥ This function may not work depending on the disc's recording. ∫ Play Menu This works only when the elapsed play time can be displayed. It also works with all JPEG content. Repeat (➜ page 18, Repeat play) A-B Repeat Except [JPEG] [DVD-VR] (Still picture part) To repeat a specified section Press [ENTER] at the starting and ending points. Press [ENTER] again to cancel. [DVD-VR] (Except still picture part) [DVD-V] (Except iR/iRW) Allows you to browse the disc contents and start playing from the selected position. You can select either "Intro Mode" or "Interval Mode" in "Advanced Advanced Disc Review" in the "Disc" menu (➜ page 25). Disc Review When you find a title/program to play Press [1 PLAY]. ≥ This may not work depending on the disc and the play position. ≥ [DVD-VR] This does not work when playing a playlist (➜ page 21). Items shown differ depending on the type of disc. ∫ Picture Menu Picture Mode Normal Cinema1: Mellows images and enhances detail in dark scenes. Cinema2: Sharpens images and enhances detail in dark scenes. Animation: Suitable for animation. Dynamic: Enhances the contrast for powerful images. User: Press [ENTER] to select "Picture Adjustment" (➜ below). Picture Adjustment Contrast: Increases the contrast between light and dark parts of the picture. Brightness: Brightens the picture. Sharpness: Adjusts the sharpness of the edges of horizontal lines. Color: Adjusts the shade of the picture's color. Gamma: Adjusts the brightness of dark parts. Depth Enhancer: Reduces the rough noise in the background to give a greater feeling of depth. To select suitable picture quality with your television (Video recordings will be converted to, and output as, high-definition video.) Video Output Mode When HDMI connection is being used and "Video Mode" (➜ page 26, "HDMI" menu) is set to "On" 480i (interlaced) 480p (progressive) 720p (progressive) 1080i (interlaced) 1080p (progressive) ≥Select a video output with an "¢" mark. The "¢" mark shows that the video output is acceptable with your television. ≥Selecting a video output without an "¢" mark can result in the picture being distorted. If the picture is distorted, press and hold [CANCEL] until the picture is displayed correctly. (The output will return to "480p".) ≥Output from the COMPONENT VIDEO OUT terminals will be "480i". Transfer Mode When HDMI connection is not being used or "Video Mode" (➜ page 26, "HDMI" menu) is set to "Off" 480i (interlaced) 480p (progressive) ≥When you select "480p", a confirmation screen appears. Select "Yes" only if connecting to a progressive output compatible television. If you have chosen "480p", "720p", "1080i" or "1080p" (➜ above), select the method of conversion for progressive output to suit the type of material. Auto1: Detects 24 frame-per-second film content and appropriately converts it. Auto2: Compatible with 30 frame-per-second film content in addition to 24 frame-per-second film content. Video: Select if the video content is distorted when using Auto1 or Auto2. (Continued on next page) Using on-screen menus RQTX0064 23