Panasonic SCPT1050 SCPT1050 User Guide - Page 4

Simple Setup 1 step Assembling the front speakers Preparation ≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it. ≥ For assembly, use a Phillips-head screwdriver. ≥ There is no difference between the right and left speakers and stands. ≥ For optional wall mount, refer to page 6. Make sure you have all the indicated components before starting assembly, setup, and connection. 2 Front speakers 2 Stands (with cable) 2 Bases 8 Screws Assembling the front speakers Slide into the groove. Tighten securely. Position the cable between the ridges. Leave about 80 mm (35/16z) Insert the wire fully. i: White j: Blue Push ! Press into the groove. Tighten securely. Speaker assembly option Thread the speaker cable through the base. Leave about 100 mm (315/16z) Attach the speaker. You can remove and use the cable from the stand. To reattach the cable, refer to page 6. Insert the wire fully. i: White j: Blue Push ! Press into the groove. Tighten securely. ∫ Preventing the speakers from falling ≥ You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened. ≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers. String (not included) Thread from the wall to the speaker and tie tightly. Rear of the speaker Screw eye (not included) Wall Approx. 150 mm (529/32z) RQTX0064 4