Panasonic SL-1200MK7R Owners Manual - Page 12
Connections and installation
View all Panasonic SL-1200MK7R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connections and installation Turn off all units and disconnect the AC power supply cord from the socket before making any connections. Connect the AC power supply cord only after all other connections are completed. Be sure to connect the PHONO earth lead. Otherwise mains hum may occur. Refer also to the instruction manual of the connected device. 1 Connect the PHONO cable and PHONO earth lead to the PHONO input terminals of the connected equipment. You will not have adequate volume or sound quality if the connected amplifier has no PHONO input terminals. 2 Connect the AC power supply cord. Confirm the wattage of the AC outlet on the connected equipment before using it for this unit. For the power consumption of this unit, see the specifications. ( 23) Connecting to a pre-main amplifier or component system / Connecting to a mixer Back of main unit L PHONO EARTH R PHONO OUT R L PHONO cable/ PHONO earth lead R L AC power supply cord To a household mains socket 1)0/0 &"35) 1)0/0 Back of main unit # Back of main unit " L PHONO EARTH R PHONO OUT PHONO cable PHONO earth lead L PHONO EARTH R PHONO OUT PHONO cable R L # */ 3 - 1)0/0 3- Audio mixer R L " */ 065 3 - 3 - 1)0/0 1)0/0 3- PHONO Amplifier (not included) Refer to the operating instructions of the audio mixer sold separately. Attention Tighten the PHONO earth terminal using a Phillips head screwdriver. Note Although the AC power switch is in the "OFF" position, the unit is not completely disconnected from the mains. Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed. 12 (12) English