Panasonic SL-1200MK7R Owners Manual - Page 14

Adjustment

Page 14 highlights

Adjustment Horizontal balance Preparation  Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp.  Lower the cue lever.  Turn the anti-skating control to "0". Stylus pressure Preparation  Return the tone arm to the arm rest and fix it with the arm clamp. 1 Free the tone arm from the arm rest and adjust horizontal balance by turning the balance weight. Hold the tone arm and turn the balance weight in the arrow direction to adjust the balance until the arm is approximately horizontal.  Take care not to allow the stylus tip Balance weight to touch the turntable or main unit. Hold here to turn 1 Turn the stylus pressure control until "0" comes to the center line of the rear of the tone arm.  Hold the balance weight still while doing this. Stylus pressure control Hold here to turn Balance weight Center line Arm clamp Arm rest Cue lever Anti-skating control Balanced and the tone arm is parallel to the turntable. The balance weight is too far forward. The balance weight is too far back. Arm clamp Note  Refer to the user's guide for your stylus for the appropriate stylus pressure. 14 (14) English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

14
English
(14)
Anti-skating control
Arm clamp
Arm rest
Cue lever
1
Free the tone arm from the arm
rest and adjust horizontal balance
by turning the balance weight.
Hold the tone arm and turn the balance
weight in the arrow direction to adjust
the balance until the arm is approximately
horizontal.
Take care not to
allow the stylus tip
to touch the
turntable or main
unit.
Balance weight
Hold here
to turn
1
Turn the stylus pressure control
until “0“ comes to the center line
of the rear of the tone arm.
Hold the balance
weight still while
doing this.
Preparation
Return the tone arm to the arm rest and fix it
with the arm clamp.
Horizontal balance
Stylus pressure
Preparation
Remove the stylus cover, taking care not
to damage the stylus, then release the arm
clamp.
Lower the cue lever.
Turn the anti-skating control to “0”.
Adjustment
Balance weight
Arm clamp
Center line
Stylus pressure
control
Hold here
to turn
Balanced and the tone
arm is parallel to the
turntable.
The balance weight is
too far forward.
The balance weight is
too far back.
Refer to the user's guide for your stylus for
the appropriate stylus pressure.
Note