Panasonic SL-1200MK7R Owners Manual - Page 17
English, Armlift height, Operation settings, rest and fix it with the arm clamp.
View all Panasonic SL-1200MK7R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Armlift height Make an adjustment according to your cartridge if necessary. Preparation Put a record on the turntable. Remove the stylus cover, taking care not to damage the stylus, then release the arm clamp. Lift the cue lever and move the tone arm over the record. 1 Check the armlift height (distance between the stylus tip and record surface). If adjustment is needed, go to step 2 . The armlift height is factory-adjusted to 8 to 13 mm (5/16" to 33/64"). 2 Return the tone arm to the arm rest and fix it with the arm clamp. Turn the adjustment screw. Turning the screw clockwise lowers the armlift. Turning the screw counterclockwise raises the armlift. Armlift Armlift screw Arm clamp Getting started BK2 BK1 TQ2 TQ1 78 REV LED ON Operation settings Allows for LED color setting, reverse playback setting, 78 rpm setting, torque setting and brake setting. ᶃTurn the unit off and pull out the power plug. ᶄAdjust as desired by setting the switches with a fine Phillips head screwdriver and the like. ON OFF Switch no. ON 12345678 LED color setting Allows you to select red or blue for the color of the strobe light, speed select buttons, pitch range select button and RESET LED lamp. Red Blue Switch no.: 1 (LED) OFF (Factory setting) ON Reverse playback setting Allows you to disable or enable reverse playback. ( 19) REV disabled REV enabled Switch no.: 3 (REV) OFF (Factory setting) ON 78 rpm setting Allows you to disable or enable 78 rpm. ( 19) 78 rpm disabled 78 rpm enabled Switch no.: 4 (78) OFF (Factory setting) ON Torque setting Allows you to select from four levels of strength to adjust the torque. Switch no.: 5 (TQ1) Switch no.: 6 (TQ2) High ᶃ ON ON ˱ ᶄ OFF ON ᶅ OFF (Factory setting) OFF (Factory setting) Low ᶆ ON OFF Brake setting Allows you to select from four levels of brake strength to stop the turntable after [START-STOP] is pressed. Switch no.: 7 (BK1) Switch no.: 8 (BK2) High ᶃ OFF ON ᶄ OFF (Factory setting) OFF (Factory setting) ˱ ᶅ ON OFF Low ᶆ ON ON 17 (17) English