Panasonic SVAP10U SVAP10U User Guide - Page 9
INSERTION AND CONNECTIONS, Insertion, Precautions During Setup, Connections
View all Panasonic SVAP10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Insertion Vertical Layout Horizontal Layout Connections TV 2 PC 2 A 1 1 Preparation Insertion and Connections ª Insertion Be sure to insert the stand when selecting the Vertical layout and the feet when selecting the Horizontal layout. Insertion for Vertical Layout 1 Insert the stand into the holes as shown in the illustration. 2 Tighten the screw to join the main unit and the stand. Insertion for Horizontal Layout 1 Attach the feet for Horizontal Layout to the four corners of the side which does not have a vent on the main unit. (Attach them to the position of mark A.) ≥When detaching the feet, coating may be peeled off. Do not detach them after attaching them. ≥Select [Vertical] or [Horizontal] under [Layout] after Insertion and connections. (Initial setting: [Vertical]) ≥If you do not select the [Layout] menu, the direction of operation of the Cursor buttons will be different when using with the Horizontal layout. ª Precautions During Setup As this printer gets hot during use, operate it in a well ventilated area. Place printer at least 4" (10 cm) away from any walls to the left, right, above or rear of printer. Do not place any objects on top of printer. ª Connections For Connection to TV 1 Connect the AC Power Cord (supplied) with the main unit and AC outlet with the cord hooked to the cord stopper. 2 Connect the Video cable (supplied) to [VIDEO OUT] Socket on main unit and the Video Input Socket on TV. ≥After connections, turn on the Photo Printer and TV, and switch the input to the video input. For Connection to PC 1 Connect the AC Power Cord (supplied) with the main unit and AC outlet with the cord hooked to the cord stopper. 2 Connect the USB Connection Cable (not supplied) to the USB Socket on main unit and the USB Socket on PC. ≥You can purchase a generic USB A-B cable to use with this product at many consumer electronic retail outlets. ≥After connections, see page 31. THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. ª Paper That Can Be Used For Printing The Photo Printer can use the following types of paper. Use Ink Cassette/Paper Sets that bear the mark. (Print Sets that bear the µ mark, the ∂ mark, or no mark at all cannot be used.) ≥4" x 5-7/8" (100 x 148 mm) printing paper* *with borders: The Ink Cassette/Paper Set VW-APA50U is required. ≥16 Pre-Cut Adhesive paper (overcoat type): The Ink Cassette/Paper Set VW-APASD16U is required. ≥4" x 6" (100 x 150 mm) printing paper* (overcoat type) *without borders: The Ink Cassette/Paper Set VW-APKC36U is required. ≥Use the Ink Cassette with the paper provided in the same box. 9