Panasonic WJ-HD616/1000 Operating Instructions
Panasonic WJ-HD616/1000 Manual
 |
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Panasonic WJ-HD616/1000 manual content summary:
- Panasonic WJ-HD616/1000 | Operating Instructions - Page 1
Operating Instructions Digital Disk Recorder Model No. WJ-HD616K WJ-HD716K WJ-HD616K/G WJ-HD716K/G ERROR represents WJ-HD616K. Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. No model number suffix is shown in this - Panasonic WJ-HD616/1000 | Operating Instructions - Page 2
(Auto panning, etc 69 Operate the setup menu of the camera 70 Disk management 71 Delete images recorded on the hard disk drives manually 71 Format (initialize) an SDHC/SD memory card....... 73 Configure the network settings 74 Configure the network settings of the recorder.... 74 Configure - Panasonic WJ-HD616/1000 | Operating Instructions - Page 3
(Auto panning, etc 117 Operate the setup menu of the camera 118 Disk management 119 Delete images recorded on the hard disk drives manually 119 Format (initialize) an SDHC/SD memory card..... 121 Notification by e-mail 122 Alarm mail 122 Warning mail 123 Troubleshooting 124 Glossary 129 3 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 4
disk drives. This product supports HDMI (High-Definition Multimedia manuals The following 3 manuals are provided for the WJ-HD616K and the WJ-HD716K. Installation Guide: Contains descriptions of how to install/connect this product and how to configure the required settings. Operating Instructions - Panasonic WJ-HD616/1000 | Operating Instructions - Page 5
Adobe® Reader®: It is necessary to refer to the operating instructions on the provided CD-ROM. * When using Microsoft® Windows® Vista® Important: • If using a PC that does not meet the above system requirements, it may cause problems such as slow imag- ing or the browser becomes inoperable - Panasonic WJ-HD616/1000 | Operating Instructions - Page 6
Restrictions upon display of images When displaying images using this product, some functions have restrictions as follows. Before using this product, keep the following in mind. When displaying live images from the camera on a web browser • Black screen may be displayed for the first few seconds - Panasonic WJ-HD616/1000 | Operating Instructions - Page 7
Before using this product Video Motion Detection (VMD) function The VMD function of this product detects motions referring to changes of brightness in the areas set in advance. The VMD function will not effectively work in the following situations or may sometimes be malfunctioning. • When there is - Panasonic WJ-HD616/1000 | Operating Instructions - Page 8
emergency recording starts/ends during recording Event type Event recording types displayed on a list on various windows are as follows. MAN: Manual recording SCH: Schedule recording EMR: Emergency recording The following are detailed event recording types. VMD: Displayed when a motion is detected - Panasonic WJ-HD616/1000 | Operating Instructions - Page 9
AUDIO OUT q Status indicators ERROR: Blinks when an error that can become a problem for the recorder to run the system occurs. Blinks red: System error Blinks by holding down this button for 2 seconds or more during the manual recording. (During recording: Lights orange) t Jog dial (inside)/Shuttle - Panasonic WJ-HD616/1000 | Operating Instructions - Page 10
Shuttle ring: The following functions are provided. • Fast forward/reverse playback can be performed during playback. y Hold button [HOLD] Press this button during fast forward/reverse play- back started by the shuttle ring to hold the current playback speed (hold playback speed function). ( - Panasonic WJ-HD616/1000 | Operating Instructions - Page 11
!2 Menu operation button Arrows button: Use this button to move the cursor on the setup menu, the search menu, etc. [SETUP/ESC] button: Hold down this button for 2 seconds or more to display the setup menu. When the setup menu is being displayed, press this button to go back to the previous page. [ - Panasonic WJ-HD616/1000 | Operating Instructions - Page 12
Insert an optional SDHC/SD memory card Step 1 Open the SDHC/SD memory card slot. Insert a DVD disc (commercially available) Step 1 Open the DVD drive cover. Pull the tab down. SDHC/SD memory card slot Step 2 Insert an SDHC/SD memory card to the slot until it clicks. Pull the tab down. Step 2 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 13
Step 3 Place a disc with the label side up and fit the hole of the disc to the center (spindle) of the tray. Then, push the tray gently. Click sound will be heard and the inserted disk will be set. Spindle Step 4 Push the tray to the end. Click sound will be heard and the tray will be fixed. Step 5 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 14
About the operation window Monitor 1 (Monitor to display live images only) The default positions are indicated by the circled numbers. (Broken lined circles are not the default positions.) Important: • The setup menu will not be displayed on monitor 1. q Camera title The set camera title - Panasonic WJ-HD616/1000 | Operating Instructions - Page 15
Monitor 2 (Monitor to display live images, recorded images and the setup menu) Normal display Minimum display Camera control Playback Time and date search El-zoom Latest recorded image Minimum display/ Normal display The default positions are indicated by the circled numbers. (Broken - Panasonic WJ-HD616/1000 | Operating Instructions - Page 16
The latest recorded image will be played. Playback will start from the point set in advance of the latest recorded image. Refer to the Installation Guide for further information about the point of the latest recorded image. Search & Copy It is possible to perform operations relating to search and - Panasonic WJ-HD616/1000 | Operating Instructions - Page 17
w Status display area Indication Live Playback Description Indication Indicates that live images are currently being : Currently live images are displayed. The sequence display function is (No indica- being displayed the function that can automatically switch and tion) display images from - Panasonic WJ-HD616/1000 | Operating Instructions - Page 18
t Alarm display area Indication Alarm Description Indication Indicates that an alarm occurred. "*" indicates the camera channel (1 - 16). "#" indicates the alarm number. VMD-*: Displayed when a motion is detected LOSS-*: Displayed when a video loss occurred COM-#: Displayed when a command - Panasonic WJ-HD616/1000 | Operating Instructions - Page 19
disk drive "*" indicates the camera channel (1 - 16). "C" indicates the partition (See the descrip- tions.) "**" indicates a number (%) of the remaining disk Note: • Refer to the Installation Guide for further information about each error. 19 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 20
to the recorder. The following are descriptions of how to perform the basic operation in these 2 ways. Important: • The instructions in this manual are mainly using the buttons on the front panel. Instructions for both are pro- vided for operations only when different procedures are to be made - Panasonic WJ-HD616/1000 | Operating Instructions - Page 21
Move the position of a panel It is possible to move a panel to the other corner of the screen by rotating the jog dial (inside). When rotating the jog dial (inside) clockwise, the panel will move to the next corner in order clockwise. When rotating the jog dial counterclockwise, it will move - Panasonic WJ-HD616/1000 | Operating Instructions - Page 22
Operations of the software keyboard for character entry When it is necessary to enter characters such as when setting the camera titles on the setup menu, use the software keyboard for character entry that can be displayed by pressing the [SET] button after moving the cursor onto the entry field. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 23
Operations using a mouse The recorder can be operated using a mouse connected to the mouse port (☞ page 11) on the front panel. Move the mouse cursor onto a button or a tab on the screen, and then click on it. Note: • When no operation is made for 10 seconds or more, the mouse cursor will be hidden. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 24
panel. Refer to page 16 for further information about the functions operable on the submenu and the descriptions about them. The following are instructions for how to operate the submenu window and a panel displayed by selecting a submenu (camera control panel, camera menu panel, El-zoom panel, REC - Panasonic WJ-HD616/1000 | Operating Instructions - Page 25
Operations of the software keyboard for time and date entry When it is necessary to designate time and date such as when searching for images recorded at the specified time and date, use the software keyboard for time and date entry that can be displayed by clicking the icon on the right of the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 26
The software keyboard for character entry can be operated as follows. Up to 255 characters can be entered. Step 1 Select a desired character by clicking it. → The selected character will be displayed in the console and the cursor will move to the right. Step 2 Repeat step 1 to continue entering - Panasonic WJ-HD616/1000 | Operating Instructions - Page 27
will be displayed again. • Refer to pages 22 and 25 for how to operate the software keyboard for character entry. • Refer to the Installation Guide for how to register users. Note: • When "On" is selected for "Quick login", the user name can be selected from the displayed list. (☞ Installation - Panasonic WJ-HD616/1000 | Operating Instructions - Page 28
Monitor live images from cameras When the recorder started up, live images from cameras will be displayed according to the configured settings. Live images from cameras are displayed via the recorder. Camera Image data Monitor 1 Recorder Monitor 2 It is possible to display live images on a - Panasonic WJ-HD616/1000 | Operating Instructions - Page 29
Select a monitor (monitor 1/monitor 2) Live images can be displayed on both monitor 1 and monitor 2. When switching between a 1-screen and a multiscreen or when changing the camera channels for live images, it is firstly necessary to select a monitor (monitor 1 or monitor 2) to operate. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 30
Display images on a 1-screen To display live images on a 1-screen, take the following procedures. Operation using the buttons on the front panel Operations using a mouse Step 1 Select a monitor to display images. (☞ Page 29) Step 1 Select a monitor to display images. (☞ Page 29) Step 2 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 31
When monitor 2 is being selected Each time the [OSD] button is pressed, display of the camera title and the status bar will change as follows. Display the camera title and hide the status bar → Hide the camera title and display the status bar → Hide both the camera title and the status bar → - Panasonic WJ-HD616/1000 | Operating Instructions - Page 32
on a multiscreen with the screen pattern selected on the setup menu ("Camera setup" under "Multi screen setup" on the "Common" tab under "Display" (☞ Installation Guide)). Note: • Black zones will be displayed on the right and left or on the top and bottom depending on the connected monitor. • The - Panasonic WJ-HD616/1000 | Operating Instructions - Page 33
Operation using the buttons on the front panel Step 1 Select a monitor to display images. (☞ Page 29) Step 2 Press the [MULTI SCREEN] button. → Each time the button is pressed, the screen pat- tern of the multiscreen will change. Step 3 To display images on a 1-screen, press any of the camera - Panasonic WJ-HD616/1000 | Operating Instructions - Page 34
display can be configured on "Live sequence" on the "Monitor 1" tab (or "Monitor 2" tab) under "Display" of the setup menu. (☞ Installation Guide) Operation using the buttons on the front panel Step 1 Select a monitor to display images. (☞ Page 29) Operations using a mouse Step 1 Select - Panasonic WJ-HD616/1000 | Operating Instructions - Page 35
areas can be configured on the "Disk config." Window. (☞ Installation Guide) Only a single recording area can be set to a single hard disk Event recording area Pre-event recording area Recording area used for manual recording/schedule recording Recording area used for event recording (recording to - Panasonic WJ-HD616/1000 | Operating Instructions - Page 36
recording) Recording can be started and stopped manually. Operation using the buttons on the front panel Step 1 Press the [REC] button. → The [REC] button will light and recording will start. Operations using a mouse - Panasonic WJ-HD616/1000 | Operating Instructions - Page 37
data is sent, recording will start. • Images (data) recorded by manual recording or schedule recording will be divided into multiple files every hour on . • When "Continue" is selected for "Recording duration" (☞ Installation Guide) on the "Emergency recording" tab under "Emergency recording" of the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 38
will be played. The playback start point can be set on the setup menu ("Latest image position" on the "Basic" tab under "Basic") (☞ Installation Guide). "30 seconds before the latest" is selected at the default. • Other than above (The second and subsequent playback after logging in to the recorder - Panasonic WJ-HD616/1000 | Operating Instructions - Page 39
will be played. The playback start point can be set on the setup menu ("Latest image position" on the "Basic" tab under "Basic") (☞ Installation Guide). "30 seconds before the latest" is selected at the default. • Other than above (The second and subsequent playback after logging in to the recorder - Panasonic WJ-HD616/1000 | Operating Instructions - Page 40
according to the setting configured on the setup menu ("Camera setup" under "Multi screen setup" on the "Common" tab under "Display" (☞ Installation Guide)). Camera title display [OSD] button • Press this button to display/hide the camera title and the status bar embedded on the recorded data - Panasonic WJ-HD616/1000 | Operating Instructions - Page 41
Functions during playback (when using the mouse) Function Operation Pause Select "REC & Playback" from the submenu, and then operate the displayed "REC & Frame by frame play- Playback" panel. back/Reverse frame by frame playback Fast forward/Fast rewind Skip Skip to the latest record- - Panasonic WJ-HD616/1000 | Operating Instructions - Page 42
Note: • When using the mouse, the playback speed will change each time the [Rew] button or the [FF] button is clicked. When the [Rew] button or the [FF] button is clicked during pausing, the playback speed will be 1/2. • When displaying images on a 1-screen, audio assigned to the camera channel from - Panasonic WJ-HD616/1000 | Operating Instructions - Page 43
Play images from a designated point It is possible to start playback from a designated time and date or the latest recorded image. Playback operation can be made while recording. Playback images will be displayed on monitor 2. Play image recorded at a designated time and date Start playback by - Panasonic WJ-HD616/1000 | Operating Instructions - Page 44
recorded image. The playback start point can be set on the setup menu ("Latest image position" on the "Basic" tab under "Basic") (☞ Installation Guide). "30 seconds before the latest" is selected at the default. Operation using the buttons on the front panel Step 1 Press the [GOTO LAST] button - Panasonic WJ-HD616/1000 | Operating Instructions - Page 45
by selecting the start time and the end time Search for images recorded by the selected recording mode only. • Recording mode/Event Manual recording, schedule recording, emergency recording, video loss, terminal alarm, command alarm, video motion detection (VMD), camera site alarm • i-VMD camera - Panasonic WJ-HD616/1000 | Operating Instructions - Page 46
Time & date Displays the start time and date of the recording. Time and date range of the listed data Displays a time and date range of the listed data. Ch Displays the camera channel used for recording. Playback of images recorded using the displayed camera channel will start on a 1-screen. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 47
. The checkbox respective to the selected event type will be checked. (When selecting "All", all the checkboxes will be checked.) • Event Manual recording, schedule recording, emergency recording, video loss, terminal alarm, command alarm, video motion detection (VMD), camera site alarm • i-VMD - Panasonic WJ-HD616/1000 | Operating Instructions - Page 48
Search for copied recorded images and play (copy data search) Display a list of copied data (copied recorded images) on an SDHC/SD memory card or a DVD, and then select a desired recorded image to play from the list. It is possible to search for copied data using the filters. Available filters are " - Panasonic WJ-HD616/1000 | Operating Instructions - Page 49
How to operate Step 1 Press the [SEARCH] button on the front panel. → The recording event list window will be displayed. Step 3 Select the media to be searched. Select "DVD Drive" or "SD memory card" by pressing the [SET] button, and then press the [SET] button again after moving the cursor onto - Panasonic WJ-HD616/1000 | Operating Instructions - Page 50
Step 6 After specifying the search conditions (filters), press the [SET] button after moving the cursor onto the [OK] button. → Copied data matched the search conditions (fil- ters) will be displayed on the copied data list window. Step 8 Move the cursor onto the [B] (play) button, and then press - Panasonic WJ-HD616/1000 | Operating Instructions - Page 51
Search for time and date when a motion was detected from recorded images and play (VMD search) Display a list of time and date when a motion was detected (by the VMD function) from images recorded by all the recording modes (☞ page 37), and then select a desired recorded image to play from the list. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 52
How to operate Step 1 Press the [SEARCH] button on the front panel. → The recording event list window will be displayed. Step 3 Designate the search filters. Move the cursor onto the [VMD search] button, and then press the [SET] button on the front panel. → The search filter window will be - Panasonic WJ-HD616/1000 | Operating Instructions - Page 53
Specify the time range Move the cursor onto the [Time & date] button, and then press the [SET] button. → The time & date setup menu will be displayed. 1. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press the [SET] button. 2. Set the start point of the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 54
Note: • To delete the set detection area, take the following procedures. 1. Move the cursor onto the [Area delete] button on the search filter window, and then press the [SET] button. 2. Move the cursor onto the [Area] button of any of the detection area (A - D), and then press the [SET] button. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 55
Step 7 Move the cursor onto the [B] (play) button, and then press the [SET] button. (Or press the [PLAY] button on the front panel.) → Playback of the selected recorded data (in which motion was detected) will be displayed. Note: • When selected time and date is too close to the current time and - Panasonic WJ-HD616/1000 | Operating Instructions - Page 56
an alarm detection. Refer to the Installation Guide for the settings required to use the as a camera site alarm. In a similar way, an alarm detected by an SD5Link camera connected to occurrence will be provided to outside the system. In this manual, event actions to be taken in the alarm mode - Panasonic WJ-HD616/1000 | Operating Instructions - Page 57
on the "Common" tab under "Event" of the setup menu is set to "2s", "5s", "10s", "20s", "30s", "1min", "3min"or "5min" (☞ Installation Guide), the following actions will automatically be taken without canceling the alarm action by pressing the [Alarm reset] button. • The alarm indicator on the front - Panasonic WJ-HD616/1000 | Operating Instructions - Page 58
the alarm action will be suspended. To cancel the alarm suspension, set the external switch to "Off". Cancel the error action When an error (trouble) occurred on the recorder, the recorder will take the error action. To cancel the error action, press the [ALARM RESET] button on the front - Panasonic WJ-HD616/1000 | Operating Instructions - Page 59
of the settings of the recorder is changed • When a user who started manual copy logged out (It will take around 90 seconds until copying is stopped after Step 1 Set a destination media (DVD, SDHC/SD memory card). (☞ Installation Guide) Step 2 Press the [Copy] button on the front panel. → The data - Panasonic WJ-HD616/1000 | Operating Instructions - Page 60
respective to the selected event type will be checked. (When selecting "All", all the checkboxes will be checked.) • REC event Manual recording, schedule recording, emer- gency recording, video loss, terminal alarm, command alarm, motion auto-detection, camera site alarm • i-VMD Motion - Panasonic WJ-HD616/1000 | Operating Instructions - Page 61
Step 5 After checking the size of the data to be copied and the remaining capacity, press the [SET] button after moving the cursor onto the [Copy] button. → The copy data list window will close. Copying will start and the [COPY] icon will be displayed on the task bar on monitor 2. When copying is - Panasonic WJ-HD616/1000 | Operating Instructions - Page 62
. To operate the recorders connected in cascading connection, it is necessary to configure the settings in advance. Refer to the Installation Guide for further information. Important: • Audio cables can also be connected in cascading connection. Configuration Configure the settings required for - Panasonic WJ-HD616/1000 | Operating Instructions - Page 63
all the WJ-HD616K/WJ-HD716K in cascading connection by designating the unit number from a PS·Data compatible system controller. Refer to the operating instructions of the system controller for how to control it in the PS·Data mode. • When using the system controller whose unit address is 002 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 64
, it may be impossible to operate the camera. In this case, the indication "BUSY" will be displayed on the operation panel. Refer to the Installation Guide for further information about the priority. • Refer to page 70 for how to display the setup page of the camera and configure the settings of - Panasonic WJ-HD616/1000 | Operating Instructions - Page 65
from the camera. Depending on the models of the connected cameras, the available zooming factors may be different. Refer to the operating instructions of the camera for further information. Step 1 Step 2 Display the camera control panel (☞ page 64), and then press the camera selection button - Panasonic WJ-HD616/1000 | Operating Instructions - Page 66
Focus adjustment Adjust the focus of the camera. The auto focus function is available. Step 1 Step 2 Display the camera control panel (☞ page 64), and then press the camera selection button [2] on the front panel. → The [Focus] tab will be displayed. Press the arrows button (A B). When - Panasonic WJ-HD616/1000 | Operating Instructions - Page 67
Preset position function Move the camera to the preset position registered in advance. It is necessary in advance to register preset positions to perform the preset position function. Registration of preset positions Register the preset positions for the camera. Up to 256 preset positions can be - Panasonic WJ-HD616/1000 | Operating Instructions - Page 68
Move a camera to the preset position Move the camera to the preset position registered in advance. Step 1 Display the "Preset/Auto" window. (☞ Page 67) Step 2 Enter the preset position number to move the camera direction. The preset position number can be entered in the same manner as of the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 69
). The following 8 auto functions can be selected. Auto track, auto pan, preset sequence, sort, patrol 1, patrol 2, patrol 3, patrol 4 Refer to the operating instructions of the camera for information about each auto function. Step 3 Move the cursor onto the [Start] button, and then press the [SET - Panasonic WJ-HD616/1000 | Operating Instructions - Page 70
from the submenu. The contents of the setup menu and the operation procedures vary depending on the model of the camera. Refer to the operating instructions of the camera for further information. The following are descriptions of how to display the setup menu of the camera and of how to perform - Panasonic WJ-HD616/1000 | Operating Instructions - Page 71
Delete images recorded on the hard disk drives manually The following are descriptions of how to manually delete images recorded in the normal recording area the image was recorded (HDD auto deletion). Refer to the Installation Guide for further information. Step 1 Press the [SUB MENU] button. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 72
Step 4 Move the cursor onto "Disk", and then press the [SET] button. → The [Disk] tab will be displayed. Step 7 Move the cursor onto [OK], and then press the [SET] button. → Images recorded until the day before the set date will be deleted. Step 5 Move the cursor onto [Next page C], and then - Panasonic WJ-HD616/1000 | Operating Instructions - Page 73
Format (initialize) an SDHC/SD memory card To copy recorded images onto an SDHC/SD memory card, it is necessary in advance to insert an SDHC/SD memory card into the card slot of the recorder and format it. To delete recorded images on the SDHC/SD memory card, format the SDHC/SD memory card again. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 74
of "Network" of the setup menu for how to operate (☞ Installation Guide). Configure the network settings of the PC The TCP/IP setting of except 250)". In these operating instructions, the settings are performed on Windows XP as examples. Refer to the operating instructions of the respective OS for - Panasonic WJ-HD616/1000 | Operating Instructions - Page 75
Step 3 Click "Network Connections". Step 5 Click "Properties". → The "Network Connections" window will be displayed. Step 4 Double-click "Local Area Connection". → The "Local Area Connection Properties" window will be displayed. Step 6 Click "Internet Protocol (TCP/IP)", and then click " - Panasonic WJ-HD616/1000 | Operating Instructions - Page 76
to prevent illegal access such as a port scanning, etc. (☞ Installation Guide) To enhance the network security It is possible to enhance the network the recorder is to be connected such as an intranet or Internet service provider. Refer to a network administrator for further information about the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 77
required to display images from cameras will be displayed. Follow the instructions of the wizard to complete the installation. • When any ActiveX before running the recorder. Change the password periodically. Refer to the Installation Guide for how to change the password. • Refer to page 127 when - Panasonic WJ-HD616/1000 | Operating Instructions - Page 78
button Operation relating to the settings of the recorder can be performed using the operation panel displayed by clicking this button. Refer to Installation Guide for further information about the setup menu. Status display area (☞ page 81) The current status of the recorder such as playback status - Panasonic WJ-HD616/1000 | Operating Instructions - Page 79
1 16 will be displayed on a 16-screen. [Copy] button The copy data window will be displayed by clicking this button. Use this button to manually copy recorded images onto a DVD or an SDHC/SD memory card. (☞ Page 104) Recording event list window Number of the listed data: Total number of - Panasonic WJ-HD616/1000 | Operating Instructions - Page 80
[Ch]: A camera channel used for recording will be displayed. [Evt]: Event type will be displayed. (☞ Page 8) [HDD]: The hard disk drive number in which the cor- responding recorded images are stored will be displayed. [Audio]: When audio is attached to recorded images, the audio icon will be - Panasonic WJ-HD616/1000 | Operating Instructions - Page 81
Status display area q w e r q The status of image (live image/recorded image) display operation will be displayed. : Indicates that live images are being displayed. : Indicates that playback images are being displayed. : Indicates that reverse playback images are being displayed - Panasonic WJ-HD616/1000 | Operating Instructions - Page 82
Download operation area q w e q The start and end time and date of recorded images to be downloaded will be displayed. (☞ Page 106) [Start]: Designate the start time and date of recorded images to be downloaded. [End]: Designate the end time and date of recorded images to be downloaded. w [ - Panasonic WJ-HD616/1000 | Operating Instructions - Page 83
. The recording button and the recording stop button will be hidden when the button is clicked. (Recording button): Starts manual recording. (Recording stop button): Stops manual record- ing. Note: • To display the recording button and the recording stop button, hold down the button until they - Panasonic WJ-HD616/1000 | Operating Instructions - Page 84
level is allowed to register preset positions can register preset positions. • Refer to the operating instructions of the camera for the available preset position numbers. Auto mode Select the auto mode from position. Patrol 1 - 4: The camera will trace the manually recorded panning pattern. 84 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 85
Monitor live images from cameras Live images from cameras will be displayed in the image display area. It is possible to display live images on a 1-screen or on a multiscreen. It is also possible to display live images from multiple cameras sequentially by switching the camera channels in order ( - Panasonic WJ-HD616/1000 | Operating Instructions - Page 86
Use the electronic zoom When displaying live images on a 1-screen, it is possible to enlarge live images using the electronic zoom and to move the area of the enlarged image to be displayed. Step 1 Click any of the [x1], [x2] and [x4] buttons to change the zoom factor of the electronic zoom. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 87
Display images on a multiscreen Live images from cameras can be displayed on a multiscreen (4-, 9-, 16-screen). Step 1 Step 3 Display the top page of the operation window. (☞ Page 77) To display images on a 1-screen again, click any of the camera channel buttons in the [Cam. select] box. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 88
configured in advance. The settings of the sequence display can be configured on the [Network] tab of "Display" of the setup menu (☞ Installation Guide). Step 1 Display the top page of the operation window. (☞ Page 77) Step 2 Click the button in the [Sequence] box. → Live images from multiple - Panasonic WJ-HD616/1000 | Operating Instructions - Page 89
all the connected cameras will be recorded. • When images are being recorded in the recording mode with a higher priority than the manual recording, the manual recording will not start until the recording with a higher priority ends. Refer to page 37 for further information about the recording - Panasonic WJ-HD616/1000 | Operating Instructions - Page 90
will be played. The playback start point can be set on the setup menu ("Latest image position" on the "Basic" tab under "Basic") (☞ Installation Guide). "30 seconds before the latest" is selected at the default. • Other than above (The second and subsequent playback after logging in to the recorder - Panasonic WJ-HD616/1000 | Operating Instructions - Page 91
Playback operation Function Pause Button Fast playback/Fast reverse playback / Frame by frame play- / back/Reverse frame by frame playback Skip/Reverse skip / Time slip/Reverse / time slip Go to date Skip to the latest recorded data Multiscreen playback Electronic zoom Enlargement of - Panasonic WJ-HD616/1000 | Operating Instructions - Page 92
Play image recorded at a designated time and date Start playback by designating the desired time and date of a recorded image. Playback operation can be made while recording. Step 1 Step 5 Display the top page of the operation window. (☞ Page 77) Click the [Play] button. Step 2 Click the [ - Panasonic WJ-HD616/1000 | Operating Instructions - Page 93
by selecting the start time and the end time Search for images recorded by the selected recording mode only. • Recording mode/Event Manual recording, schedule recording, emergency recording, video loss, terminal alarm, command alarm, video motion detection (VMD), camera site alarm, i-VMD alarm - Panasonic WJ-HD616/1000 | Operating Instructions - Page 94
[Refresh] button The displayed contents will be updated to the latest. [Prev page] button Displays the previous page. [Next page] button Displays the next page. Time & date Displays the start time and date of the recording. Ch Displays the camera channel used for recording. Playback of images - Panasonic WJ-HD616/1000 | Operating Instructions - Page 95
REC event: Select an event type of recorded images to be searched for from the following. The checkbox respective to the selected event type will be checked. (When selecting "All", all the checkboxes will be checked.) Camera: Select the desired camera channel used for recording to be searched by - Panasonic WJ-HD616/1000 | Operating Instructions - Page 96
Search for time and date when a motion was detected from recorded images and play (VMD search) Display a list of time and date when a motion was detected (by the VMD function) from images recorded by all the recording modes (☞ page 37), and then select a desired recorded image to play from the list - Panasonic WJ-HD616/1000 | Operating Instructions - Page 97
Specify the mask duration Click the [C] button, and then select the mask duration from the following. 1 s, 1 min, 1 h, 24h When the mask duration is set, any motion will not be detected for the set duration after a motion detection. Use the mask duration when it takes time to detect motion or - Panasonic WJ-HD616/1000 | Operating Instructions - Page 98
Check a list of copied recorded images Display a list of copied data (copied recorded images) on an SDHC/SD memory card or a DVD, and then select a desired recorded image to play from the list. It is possible to search for copied data using the filters. Available filters are "Time & date" and "Ch". - Panasonic WJ-HD616/1000 | Operating Instructions - Page 99
data is copied into the SDHC/SD memory card slot. When recording data was copied on a DVD, insert it in the DVD drive. (☞ Installation Guide) Step 5 Click the [OK] button after completing the settings. → Copied data matched the search conditions (fil- ters) will be displayed on the copied data - Panasonic WJ-HD616/1000 | Operating Instructions - Page 100
The recorder will record images from the camera, send e-mails, etc. according to the settings when a motion is detected. Refer to the Installation Guide for the settings required to use the video motion detection function. Event action Refer to page 56. Alarm action The following are descriptions - Panasonic WJ-HD616/1000 | Operating Instructions - Page 101
Display the [ALM] button in the status display area Send a mail that notifies of an event occurrence A mail that notifies of the event occurrence with the time and date of the event occurrence will be sent (Alarm mail). Up to 4 destination addresses for the alarm mail can be registered. To send - Panasonic WJ-HD616/1000 | Operating Instructions - Page 102
recorder will take an alarm action according to the settings configured in advance when an event occurs in the alarm mode (ALM). To manually cancel the alarm action, perform the following operation. Step 1 Click the [ALM] button displayed in the status display area. Note: • When the alarm - Panasonic WJ-HD616/1000 | Operating Instructions - Page 103
Cancel an error action When an error occurred, this recorder will take an error action. To manually cancel an error action, perform the following operation. Step 1 When an error occurs, the [ERR] button will be displayed in the status display area. Step 2 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 104
Copy recorded images It is possible to manually copy images recorded in the recorder onto a DVD or an SDHC/SD memory card. It is recommended to make back-up copies on a regular basis - Panasonic WJ-HD616/1000 | Operating Instructions - Page 105
Important: • Do not remove the SDHC/SD memory card during copying on the SDHC/SD memory card. It may damage data on the SDHC/SD memory card. • In the following cases, copying will not start even when the [COPY] button is clicked. • When the end time is set earlier than the start time • Copying will - Panasonic WJ-HD616/1000 | Operating Instructions - Page 106
Download recorded images currently being played Designate the start point and the end point of recorded images currently being played and download images to a PC. When downloading recorded images, recorded images and audio will be downloaded as an image data file (filename.n3r) and an audio data - Panasonic WJ-HD616/1000 | Operating Instructions - Page 107
Step 5 Click the [OK] button after selecting "With audio" or "Without audio" to determine whether or not to download images with audio and "ON" or "OFF" for "Alter detect" to determine whether or not to attach an alteration detection code to recorded images to be downloaded. → The file download - Panasonic WJ-HD616/1000 | Operating Instructions - Page 108
Play the copied/downloaded recorded images When recorded images are copied/downloaded, recorded images and audio will be copied/downloaded as an image data file (filename.n3r) and an audio data file (filename.n3a) respectively into the copy/download destination. It is possible to play, save and - Panasonic WJ-HD616/1000 | Operating Instructions - Page 109
Step 3 Create a new folder in the desired directory and click the [Save] button. → The viewer software will be downloaded. Install the viewer software When the older version of the viewer software is installed on a PC, uninstall it before installing the newer version. Step 1 Step 3 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 110
programs, and then click the [Remove] button. → The uninstallation program will be launched. Step 3 Complete the uninstallation by following the instructions of the wizard. Step 2 Select "HD_Viewer" (the program to be deleted) from the presently installed programs, and then right-click on - Panasonic WJ-HD616/1000 | Operating Instructions - Page 111
Play the downloaded recorded images Step 1 Select "HD_Viewer" from the start menu ("Start" - "All programs" - "Panasonic" - "HD_Viewer") or doubleclick the HD_Viewer icon on the desktop. Step 4 Click the [Open] button. → The image data will be displayed. Step 2 Click the [Open file] button. → - Panasonic WJ-HD616/1000 | Operating Instructions - Page 112
Save the displayed image The currently displayed image can be saved on a PC as a JPEG file. Step 1 Step 3 Start operation when playing images using the viewer software. Click the [SAVE] button. → The "Save As" window will be displayed. Step 4 Enter the file name, and then select "JPEG (*. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 113
to detect the alteration of the data if a code for the alteration detection has been attached to the downloaded data. Refer to the Installation Guide for how to attach the alteration detection code to data. Step 1 Step 4 Launch the viewer software and display the following window. Click the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 114
work. • When a user with a higher user priority is operating at the same time, it may be impossible to operate the camera. Refer to the Installation Guide for further information about the priority. • Refer to page 118 for how to display the setup page of the camera and configure the settings of - Panasonic WJ-HD616/1000 | Operating Instructions - Page 115
images from the camera. Depending on the models of the connected cameras, the available zooming factors may be different. Refer to the operating instructions of the camera for further information. Step 1 Display the [CAM] tab. (☞ Page 114) Step 2 Note: • It is possible to adjust zooming using - Panasonic WJ-HD616/1000 | Operating Instructions - Page 116
"Home". • Only users whose user level is allowed to control cameras or to configure the settings can register the preset positions. • Refer to the operating instructions of the camera for the available preset position numbers. 116 - Panasonic WJ-HD616/1000 | Operating Instructions - Page 117
auto mode is available only for combination cameras. Refer to the operating instructions of the camera for further information about the auto mode function of position. Patrol 1 - 4: The camera will trace the manually recorded panning pattern. Step 3 Click the [Start] button to start the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 118
from a PC. The contents of the setup menu and the opera- tion procedures vary depending on the model of the camera. Refer to the operating instructions of the camera for further information. The following are descriptions of how to display the setup menu of the camera and of how to perform - Panasonic WJ-HD616/1000 | Operating Instructions - Page 119
Delete images recorded on the hard disk drives manually The following are descriptions of how to manually delete images recorded in the normal recording area the image was recorded (HDD auto deletion). Refer to the Installation Guide for further information. Step 1 Display the top page of the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 120
Step 5 Set time and date after selecting "NML rec." or "EVT rec." for "Data delete". Images recorded until the day before the set date are subject to deletion. Step 6 Click the [Execute] button. → The confirmation window will be displayed. Step 7 Click the [OK] button. → Images recorded until the - Panasonic WJ-HD616/1000 | Operating Instructions - Page 121
Format (initialize) an SDHC/SD memory card To copy recorded images onto an SDHC/SD memory card, it is necessary in advance to insert an SDHC/SD memory card into the card slot of the recorder and format it. To delete recorded images on the SDHC/SD memory card, format the SDHC/SD memory card again. - Panasonic WJ-HD616/1000 | Operating Instructions - Page 122
Notification by e-mail Alarm mail A link address to the alarm image that is saved in the recorder contained in an alarm mail as follows. Contents of the alarm mail: In HD600 (192.168.0.250), alarm was occurred. Alarm date: xx-xxx-xxxx xx:xx:xx GMT xx:xx (Example: 01-JAN-2009 GMT +0:00) Cause - Panasonic WJ-HD616/1000 | Operating Instructions - Page 123
will be displayed. (Example: MAIN THERMAL ERROR) Indication DATE STATUS Description Time and date when the trouble occurred will be displayed. The description of the trouble will be displayed. Thermal error: THERMAL ERROR Alteration detection: ALTERED Lost of the recording area: "V-ERROR - Panasonic WJ-HD616/1000 | Operating Instructions - Page 124
Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem further information about the settings. Installation Guide • Are you accessing the wrong - Panasonic WJ-HD616/1000 | Operating Instructions - Page 125
and cancel the pop-up blocker. • Are the correct user name and password entered? Confirm the correct user name and password. _ Installation Guide • When playing images recorded at a higher recording rate, audio may sometimes be played interrupted. _ • When any setting of the setup menu has - Panasonic WJ-HD616/1000 | Operating Instructions - Page 126
latest version first. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following are descriptions and then click the [Advanced] button. 3. Click the [Troubleshoot] tab and disable the DirectDraw acceleration by adjusting the level of " - Panasonic WJ-HD616/1000 | Operating Instructions - Page 127
Message displayed on the information bar Depending on the operation system in use, the following may occur. Follow the instructions below when the following occurred. By performing the following solutions, other applications may not be affected. The "Information Bar" expressed in the following - Panasonic WJ-HD616/1000 | Operating Instructions - Page 128
Symptom The following message is displayed on the information bar. "To help protect your security, Internet Explorer blocked this site from downloading files to your computer. Click here for options..." The following message is displayed on the information bar when tried to execute a downloaded file - Panasonic WJ-HD616/1000 | Operating Instructions - Page 129
320 x 240 pixels. POP 3 A protocol for receiving e-mail stored on a server on the Internet or an Intranet. POP 3 Server A server that supports POP3, currently the most widely used mail sending protocol. RAID (RAID5) An abbreviation for Redundant Arrays of Inexpensive Disks 5 that provides a highly - Panasonic WJ-HD616/1000 | Operating Instructions - Page 130
SMTP servers and clients. Both SMTP servers and clients must support SMTP authentication. SNMP (Simple Network Management Protocol) A the Internet. VGA (Video Graphic Array) Resolution with 640 x 480 pixels. VPN Service used to make public lines as private lines. Many companies are using this as a - Panasonic WJ-HD616/1000 | Operating Instructions - Page 131
. Secondary (DNS) server DNS servers usually have more than 2 systems and the secondary server is the sub system. If there is trouble with the primary server, the secondary server takes over. Multiscreen display This product can display images from multiple camera channels simultaneously while - Panasonic WJ-HD616/1000 | Operating Instructions - Page 132
ring. The hold playback speed function can keep the playback speed even after releasing the shuttle ring. Manual recording Click the [Recording] button and the [Recording stop] button to manually start and stop recording of video and audio. Router Placed in between different networks, a router sends - Panasonic WJ-HD616/1000 | Operating Instructions - Page 133
Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
 |
 |
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
Operating Instructions
Digital Disk Recorder
Model No.
WJ-HD616K
WJ-HD716K
WJ-HD616K/G
WJ-HD716K/G
ERROR
ALARM
ALARM
SUSPEND
STS
HDD1
A/F
TIMER
HDD2
HDD3
OPERATE
HDD4
ALARM
RESET
GOTO LAST
GOTO DATE
SEARCH
COPY
REV
FWD
SETUP
SET
HOLD
SUB
MENU
ESC
STOP
PAUSE
PLAY
REC
REC STOP
MOUSE
Digital Disk Recorder WJ-HD616
3
2
7
6
12
11
16
15
MONITOR
SEQ
MULTI SCREEN
OSD
1
5
9
4
8
0/10
14
13
This illustration represents WJ-HD616K.