Panasonic WJ-HD616/1000 Operating Instructions - Page 50
Step 6, Important, To stop the playback, press the [STOP] button on
View all Panasonic WJ-HD616/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Step 6 After specifying the search conditions (filters), press the [SET] button after moving the cursor onto the [OK] button. → Copied data matched the search conditions (fil- ters) will be displayed on the copied data list window. Step 8 Move the cursor onto the [B] (play) button, and then press the [SET] button. Step 7 Select the desired copied data to play. To select a copied data, rotate the jog dial (inside). → Playback of recorded images of the selected copied data will start. Important: • Do not remove the SDHC/SD memory card during playback of copied data on the SDHC/SD memory card. It may damage data on the SDHC/SD memory card. Note: • The following operations are unavailable duing playback of copied recorded images. • Go to last • Playback on a multiscreen • Playback of audio • When there are multiple copied data that has the same start time, camera channel and event, only the data copied first will be played when any of them is selected. Note: • When the shuttle ring (outside) is rotated, the pre- vious/next page of the list will be displayed. 50 Step 9 To stop the playback, press the [STOP] button on the front panel. → Playback will stop. Playback on monitor 2 will be switched to live image display. Note: • When starting playback from the displayed copied data list after filtering, only recorded images of the listed copied data are subject to play. It is possible to make all recorded images available to play by stopping the playback and starting playback again. • When starting playback after inserting the other SDHC/SD memory card, select "Hard disk drive" on the "Select Medium" window first and then select "SD memory card".