Panasonic WJ-PC200 Operating Instructions - Page 38
Screw body diameter, mm {3/8 inches}, accessory of receiver, side unit, BNC connector cover
View all Panasonic WJ-PC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Connecting the Unit 5. Secure the BNC connector cover with included the screw (M2.6 ´ 10 mm {3/8 inches}: included parts) to the receiver side unit. (Recommended torque 0.6±0.2 N·m {6±0.2 kgf·cm}) Screw (body diameter 2.6×10 mm {3/8 inches}: accessory of receiver side unit) BNC connector cover (accessory of receiver side unit) 6. Connect a ethernet cable (Cat-5e or higher) to the receiver side unit and network or PoE power supply device. Network connector Network device Ethernet cable Network connector 38 Operating Instructions
5.
Secure the BNC connector cover with included the screw (M2.6
´
10 mm
{3/8 inches}: included parts) to the receiver side unit.
(Recommended torque 0.6±0.2 N·m {6±0.2 k
g
f·cm})
Screw (body diameter
2.6
×
10 mm {3/8 inches}:
accessory of receiver
side unit)
BNC connector cover
(accessory of receiver side unit)
6.
Connect a ethernet cable (Cat-5e or higher) to the receiver side unit and network or
PoE power supply device.
Network connector
Network device
Ethernet cable
Network connector
38
Operating Instructions
4 Connecting the Unit