Panasonic WJ-PC200 Operating Instructions - Page 50

Changing coaxial - LAN converter’s Settings, Changing the coaxial - LAN converter's IP address

Get Panasonic WJ-PC200 PDF manuals and user guides View all Panasonic WJ-PC200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

5 Maintenance Screen of coaxial - LAN converter 5.2.3 Changing coaxial - LAN converter's Settings The IP address for accessing the maintenance screen can be changed. The camera side and receiver side units can be connected at their default settings. Multiple units on the receiver side can also be connected at their default setting. Changing the coaxial - LAN converter's IP address You may change the coaxial - LAN converter's IP address and subnet mask if necessary. Change the IP address in cases such as when the coaxial - LAN converter is using the same IP address as another network device, or if you want to match the address used in the network. Change the IP address to an address different from the one used by the device that is to be connected to the camera side unit. 1. Access the maintenance screen of the coaxial - LAN converter. 2. Click [Option]. 3. Enter the desired IP address. 4. Enter the subnet mask if necessary. 5. Click [OK], then click [OK] when prompted. 6. Click [Restart]. • The adapter will restart, and the new settings will take effect. The new IP address must be entered in the web browser's address bar in order to access the adapter's maintenance screen again. 7. Click [Restart], then click [Reset] button in the restart tab. WJ-PR204 After restarting, make connections using the changed IP address displayed in the maintenance screen. IMPORTANT • Match the IP address and subnet mask settings to those used in your network. • Be sure to write down the new IP address and keep a note for future reference. 50 Operating Instructions

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
5.2.3
Changing coaxial - LAN converter’s Settings
The IP address for accessing the maintenance screen can be changed.
The camera side and receiver side units can be connected at their default settings.
Multiple units on the receiver side can also be connected at their default setting.
Changing the coaxial - LAN converter’s IP address
You may change the coaxial - LAN converter’s IP address and subnet mask if necessary.
Change the IP address in cases such as when the coaxial - LAN converter is using the
same IP address as another network device, or if you want to match the address used
in the network. Change the IP address to an address different from the one used by the
device that is to be connected to the camera side unit.
1.
Access the maintenance screen of the coaxial - LAN converter.
2.
Click [Option].
3.
Enter the desired IP address.
4.
Enter the subnet mask if necessary.
5.
Click [OK], then click [OK] when prompted.
6.
Click [Restart].
•
The adapter will restart, and the new settings will take effect. The new IP address
must be entered in the web browser’s address bar in order to access the
adapter’s maintenance screen again.
7.
Click [Restart], then click [Reset] button in the restart tab.
WJ-PR204
After restarting, make connections using the changed IP address displayed in the
maintenance screen.
IMPORTANT
•
Match the IP address and subnet mask settings to those used in your network.
•
Be sure to write down the new IP address and keep a note for future reference.
50
Operating Instructions
5 Maintenance Screen of coaxial - LAN converter