Panasonic WVCW974 WVCW974 User Guide - Page 25

■ Scene Select Settings Display the scene select setting menu from the setup menu to configure scene select settings. First, display the scene select setting menu. 1. Display the setup menu (page 24), move the cursor to SCENE SELECT O, and then press the CAM (SET) button. This will display the scene select setting menu. **SCENE SELECT** SCENE INDOOR(L) LOAD RET TOP ● Scene Select Settings Use the following procedure to configure scene select settings. 1. Move the cursor to SCENE, and then tilt the joystick left or right to change the scene setup. INDOOR (L) : Indoor setting (picture quality priority) INDOOR (H) : Indoor setting (sensitivity priority) OUTDOOR (L) : Outdoor setting (picture quality priority) OUTDOOR (H) : Outdoor setting (sensitivity priority) Settings related to the picture switch depending on the scene settings. Scene select settings and relationship to other settings are shown in the table below. AGC INDOOR (L) MID INDOOR (H) HIGH OUTDOOR (L) MID OUTDOOR (H) HIGH SENS UP OFF ×2 AUTO OFF ×2 AUTO SHUTTER OFF OFF AUTO AUTO BW INDOOR (L) OFF INDOOR (H) OFF OUTDOOR (L) AUTO OUTDOOR (H) AUTO DNR LOW HIGH LOW HIGH WHITE BAL ATW1 ATW1 ATW2 ATW2 2. Move the cursor to LOAD, and then press the CAM (SET) button. This will cause the setup you selected for SCENE in step 1 to be applied to the image. ■ Preset Position Settings ● Position Number Selection (MAP) You could use the MAP item on the pan/tilt setup menu instead of the PRESET item to select a position number. 1. Move the cursor to PRESET POSITION O, and then press the CAM (SET) button. **PRESET POSITION** 1* 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ID:DOOR 033-064 225-256 RET TOP 2. Move the cursor to the number you want to select, and then press the CAM (SET) button. This registers the position number setting and displays the preset setting menu. (this page) To select a position number in the range of 033 to 064, move the cursor to 33-64 in the lower left corner of the menu, and then press the CAM (SET) button. Preset numbers set subsequently are the same. **PRESET POSITION** 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 ID: 065-096 001-032 RET TOP Notes: • An asterisk (*) to the right of a position number indicates that it already has a preset position assigned to it. The home position number is indicated by the letter H next to the asterisk. • When the cursor is located at a position number that has a position ID, the position ID text appears next to ID: on the menu screen. ● Position Setting (POSITION SET) The position setting can be used to specify the camera position (pan and tilt), the lens zoom setting, and the focus setting. 1. Move the cursor to POSITION SET O and press the CAM (SET) button to display the position setting menu. PRESET NO. 1* POSITION SET PRESET ID ON RET TOP DEL -25-