Panasonic fv08vsl1 Installation Instructions - Page 7
Fig.3-2
View all Panasonic fv08vsl1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
INSTALLATION I (JOIST MOUNTING-I) CONTINUED 3. Install the suspension bracket and the flange of fan body to joists by using long screws (ST4.2X20) ( If spacing A between joists is 10 1/4-12 inches, install the flange of Joist fan body according to Fig.3-2, others according to Fig.3-1 install the product.) Fan body 4 Long screws (ST4.2X20) Fig.3-1 A = 10 1/4-12 inches Joist 4. Install the suspension bracket to joists by using long screws (ST4.2X20) and secure it to the fan body by using screw II (ST4.2X12). (Fig.4) 5. Remove junction box cover and secure conduit or stress relief to junction box knock-out hole. (Fig.5) 6. Refer to wiring diagram (page 5). Using wire nuts, connect house power wires to ventilating fan wires and lighting unit wires: black to black; white to white; green to green; Replace the junction box cover. (Fig.5) CAUTION: Mount junction box cover carefully so that lead wires are not pinched. 7.FV-08VSL1: install a circular duct and secure it with duct tape. FV-10VS L1: squeeze the circular duct to fit the adaptor, then slipped onto the adaptor and secure it with duct tape. Squeeze Fan body 2 Long screws (ST4.2X20) Fig.3-2 Joist 2 Long screws (ST4.2X20) O O Screw II (ST4.2X12) Fig.4 Circular duct Conduit Junction box cover Joist Duct tape Conduit Junction box 0 Wire nut Lead wires Green wires 7 Fig. 5