Pantech Jest 2 Manual - English - Page 31

8. Under Subject, input a subject using the QWERTY Keypad. 9. Press the Right Soft Key [Options] to select from the following: Review, Save As Draft, Insert Quick Text, Priority Level or Cancel Message. These options will vary depending on the message contents chosen. 10. To send the Voice Message, press the Key [SEND] or press the SEND Key . SPEED DIALS From idle mode, calls can be placed to numbers stored in speed dials by sliding the phone up, and pressing & holding the location number on the keypad. 1. Slide the phone up, press the Key [MENU], then press 1. Contacts, 5. Speed Dials. 2. Highlight the desired Speed Dial position, or enter the Speed Dial digit(s), then press the Key [SET]. 3. Select the desired Contact entry, then press the Key. 4. Highlight the number you wish to set to speed dial then press the Key. 5. "ASSIGN SPEED DIAL TO CONTACT?"appears on the screen. Select Yes and press the Key. A confirmation message appears. "Unassigned" appears if the location is available. TO ERASE A SAVED SPEED DIAL 1. Slide the phone up, press the Key [MENU], then press 1. Contacts, 5. Speed Dials. 2. Select the Speed Dial entry you want to erase. 3. Press the Right Soft Key [Remove]. 4. "REMOVE SPEED DIAL?"appears on the screen. Select Yes and press the Key. A confirmation message appears. 58 IN CASE OF EMERGENCY Your phone has a special menu to organize your emergency contacts and personal information. TO ASSIGN EMERGENCY CONTACTS 01 Follow the procedures below to register a Contact to be contacted in case of emergency, 02 or to register a medical record number or other personal info. To register up to three different Contacts to ICE: 03 1. Slide the phone up, press the Key [MENU], then press 1. Contacts, 04 6. In Case of Emergency. 05 S hortcut: From idle mode, slide the phone up and press the Right Soft Key [Contacts], then select In Case of Emergency and press the Key [VIEW]. 06 2. Select Contact 1, Contact 2 or Contact 3, then press the Key [ADD]. 07 3. To select a contact from the Contacts List, press 1. From Contacts, select the Contact entry, and then press the Key. To add a new contact as an ICE CONTACT, press 2. New Contact, enter the info, and then press the Key [SAVE]. 4. The Contact name will be displayed in the place of Contact 1, Contact 2 or Contact 3. TO RE-ASSIGN EMERGENCY CONTACTS 1. Slide the phone up, press the Key [MENU], then press 1. Contacts, 6. In Case of Emergency. 2. Select the contact you want to re-assign, press the Right Soft Key [Options], then press 1. Re-assign. 3. To select a contact from the Contacts List, press 1. From Contacts, select the Contact entry, and then press the Key. To reassign a new contact as an ICE CONTACT, press 2. New Contact, enter the info then press the Key [SAVE]. 4. A confirmation message appears. 589