Pentax 15936 Optio S1 Black Optio S-1 - Page 177
Using the Power Saving Function, to select [Power
View all Pentax 15936 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Using the Power Saving Function You can save battery power by setting the display to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the display returns to the ordinary brightness if any button is pressed. 1 Press the 3 button in Q mode. The [W Setting] menu appears. 2 Use the four-way controller (23) to select [Power Saving]. 3 Press the four-way controller (5). A pull-down menu appears. 4 Use the four-way controller (23) Setting 2/3 to select the time until the camera Video Out 2min. enters the power saving mode. Brightness Level 1min. Power Saving 30sec. Choose from [2min.], [1min.], [30sec.], Auto Power Off 15sec. [15sec.], [5sec.] or [Off]. Reset Delete All 5sec. Off MENU ขCaᶖncel OK OቯK 5 Press the 4 button. 7 The setting is saved. • Power Saving does not function in the following situations: - In the playback mode - While recording a movie - While the camera is connected to a computer - While a menu is being displayed • When no operation is performed after the camera is turned on, the Power Saving function is activated only after 15 seconds elapse even if [5sec.] is set. Settings 175