Pentax 17103 M50 Operating Manual - Page 117

Playing Back and Deleting Images Playing Back Images Switching Between A Mode and Q Mode In this manual, the capture mode, such as for taking still pictures, is referred to as [A mode]. The playback mode, such as for displaying captured images on the display, is referred to as [Q mode]. In Q mode, you can perform simple editing operations on the images that are played back. Follow the procedure below to switch between A mode and Q mode. To Switch from A Mode to Q Mode 1 Press the Q button. The camera switches to Q mode. Playing Back and Deleting Images To Switch from Q Mode to A Mode 1 5 Press the Q button or shutter release button halfway. The camera switches to A mode. Displaying data in the built-in memory When an SD Memory Card is inserted in the camera, images, movies, and sounds in the SD Memory Card are displayed. If you want to display images, movies, and sounds in the built-in memory, remove the SD Memory Card. [Viewing images in the built-in memory while the SD Memory Card is inserted (built-in memory display)] • When switching from A mode to Q mode, you can display images, movies, and sounds in the built-in memory while the SD Memory Card is inserted by pressing the Q button for more than one second. • In built-in memory display, you can play back still pictures (including enlarged display) (p.42, p.118), movies (p.125), and sounds (p.159), and switch between nine-image display, folder display, and calendar display (p.117). • In built-in memory display, you cannot delete data, delete a selection, display the Playback Mode Palette, or display the menu. If you want to perform any of these operations on images, movies, or sounds in the builtin memory, do so after removing the SD Memory Card. Playing Back Still Pictures Refer to "Playing Back Images" (p.42) for instructions. 115