Pentax 17103 M50 Operating Manual - Page 124

Zoom/f/y button Q Button Four-way controller 4 button Green button Digital SR MENU Cancel OK OK Correcting Camera Shake with Digital SR For correcting the camera shake in recorded images. 1 Enter the Q mode and use the four-way controller (45) to choose the image to correct camera shake for. 2 Press the four-way controller (3). 5 3 The Playback Mode Palette appears. Use the four-way controller (2345) to select P (Digital SR). 4 Press the 4 button. The image to correct is displayed. 5 Press the 4 button. 100-0001 Executes shake reduction processing on this image Playing Back and Deleting Images 6 7 122 Use the four-way controller (23) to select [Overwrite] or [Save as]. If the image is protected, you can only select [Save as]. Press the 4 button. The corrected image is saved in the built-in memory or SD Memory Card. MENU Cancel OK OK Overwrite original image? Overwrite Save as Cancel OK OK • If you overwrite the image, the shake information is lost, and you cannot perform shake correction again. • P appears on the upper left of the display only when playing back images for which camera shake can be corrected. However, camera shake may not be corrected when the camera shake is too extreme. In such cases, the error message will appear in step 5.