Pentax 17103 M50 Operating Manual - Page 28
Using the AC Adapter, Remove the Battery.
UPC - 027075140400
View all Pentax 17103 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Getting Started 1 4 1 AC plug cord 8 7 AC adapter 6 3 DC coupler DC terminal Using the AC Adapter Use of the AC adapter kit K-AC78 (optional) is recommended if you intend to use the camera for a long time or connect it to a PC. 1 Make sure that the camera is turned off and open the battery/card cover. 2 Remove the Battery. Refer to p.24 on how to open/close the battery/card cover and remove the battery. 3 Insert the DC coupler. Using the side of the DC coupler to press the battery/card cover lock lever, insert the DC coupler. Confirm the DC coupler is locked in place. 4 Extract the DC coupler cord. Pull out the tab at the joint of the camera and the battery/card cover so that the DC coupler cord extracts from there. 5 Close the battery/card cover. 6 Connect the DC terminal of the AC adapter to the DC terminal of the DC coupler. 7 Connect the AC plug cord to the AC adapter. 8 Plug the AC plug cord into the power outlet. 26