Pentax UC-1 UC-1 Manual - Page 45

Pentax UC-1 Manual

Page 45 highlights

• The temperature range at which this camera function properly is 50°C to-10°C (122° F to 14° F). • Electrical problems may often be caused by water, dirt or dust at points of electrical contact. Also check for battery leakage, traces of dirt or grease, or corrosion due to salinity or gas. If you cannot correct the problem, have your camera inspected at a Pentax service center. Repairs of this nature are not covered under the terms of the warranty and charges may be assessed. • Regular size color prints may cut off what appears on the extreme edges of the film frame. Compose your picture with a margin of safety at the edges. • To maintain optimum performance, it is rec- ommended that the camera be inspected every one or two years. If the camera has not been used for an extended period, or is being prepared for an important photographic session, it is recommended that you have the camera inspected or test shoot with it. • Repairs made necessary due to usage of this product in an industrial or commercial application may not be covered under the terms of the Pentax warranty. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

The
temperature
range
at
which
this
camera
function
properly
is
50
°
C
to
-10
°
C
(122
°
F
to
14
°
F).
Electrical
problems
may
often
be
caused
by
water,
dirt
or
dust
at
points
of
electrical
con-
tact.
Also
check
for
battery
leakage,
traces
of
dirt
or
grease,
or
corrosion
due
to
salinity
or
gas.
If
you
cannot
correct
the
problem,
have
your
camera
inspected
at
a
Pentax
service
center.
Repairs
of
this
nature
are
not
covered
under
the
terms
of
the
warranty
and
charges
may
be
assessed.
Regular
size
color
prints
may
cut
off
what
appears
on
the
extreme
edges
of
the
film
frame.
Compose
your
picture
with
a
margin
of
safety
at
the
edges.
To
maintain
optimum
performance,
it
is
rec-
ommended
that
the
camera
be
inspected
every
one
or
two
years.
If
the
camera
has
not
been
used
for
an
extended
period,
or
is
being
prepared
for
an
important
photographic
ses-
sion,
it
is
recommended
that
you
have
the
camera
inspected
or
test
shoot
with
it.
Repairs
made
necessary
due
to
usage
of
this
product
in
an
industrial
or
commercial
appli-
cation
may
not
be
covered
under
the
terms
of
the
Pentax
warranty.
41