Pfaff ClassicStyle 2025 Owner's Manual - Page 53

Bridging stitch, Cross hem stitch

Get Pfaff ClassicStyle 2025 PDF manuals and user guides View all Pfaff ClassicStyle 2025 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Utility stitches Stitch Stitch 8 6.0 2.0 3-5 0 18 6.0 2.0 3-5 0 Bridging stitch The bridging stitch creates a hemstitching effect. It is often used for connecting two Ànished fabric edges. • Finish the fabric edges and press the seam allowance to the wrong side. • Place the fabric under the presser foot with the edges approximately 1/8 inch (3 mm) apart. • Stitch from the right side of the fabric, making sure that the needle catches the fabric on the right and left sides. Tip: To make guiding the fabric easier, use the bridging guide (special accessory). It is available in 3 mm and 5 mm widths. The small post on the bottom of the guide is inserted in the small hole at the front of the needle plate. Cross hem stitch This highly elastic stitch is very suitable for decorative hems. • Fold the hem allowance to the reverse side. • Stitch the hem from the right side of the fabric. Trim any excess hem fabric up to the stitching. 4:13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
4:13
8
6.0
2.0
3-5
0
18
6.0
2.0
3-5
0
Utility stitches
Bridging stitch
The bridging stitch creates a hemstitching effect. It is often
used for connecting two
À
nished fabric edges.
•
Finish the fabric edges and press the seam allowance to
the wrong side.
•
Place the fabric under the presser foot with the edges
approximately 1/8 inch (3 mm) apart.
•
Stitch from the right side of the fabric, making sure that
the needle catches the fabric on the right and left sides.
Tip:
To make guiding the fabric easier, use the bridging guide
(special accessory). It is available in 3 mm and 5 mm widths.
The small post on the bottom of the guide is inserted in the
small hole at the front of the needle plate.
Cross hem stitch
This highly elastic stitch is very suitable for decorative
hems.
•
Fold the hem allowance to the reverse side.
•
Stitch the hem from the right side of the fabric. Trim any
excess hem fabric up to the stitching.
Stitch
Stitch