Pfaff ClassicStyle 2025 Owner's Manual - Page 61
Keyhole buttonhole, Manual buttonhole
View all Pfaff ClassicStyle 2025 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Buttonholes Manual buttonhole You can also set the length of the buttonhole while sewing. Select the desired buttonhole. Press the "reverse sewing" button. The word "man" appears in the window. The buttonhole length, set previously, disappears. Once you have reached the desired length, press the "reverse sewing" button once again. The machine will now sew the Àrst bartack and the second side of the buttonhole. Before the left side of the buttonhole ends, the machine will slow down. To complete the buttonhole with a second bartack, press the "reverse sewing" button once again. The machine will sew the second bartack and complete the buttonhole. The word "auto" appears in the window. All remaining buttonholes can now be repeated fully automatically. Note: The programming of the buttonhole is deleted when another stitch is selected. You can also place the last bartack manually, even after the buttonhole has been programmed. Press the "reverse sewing" button one time after you have stitched the Àrst bartack. The word "man" appears in the window. This indicates a manual Ànish of the buttonhole is desired. Before the left side of the buttonhole ends, the machine will slow down. When the left side of the buttonhole is the same length as the right side of the buttonhole press the "reverse sewing" button (16) once again. The second bartack will be sewn and complete the buttonhole. The word "auto" appears in the window. All remaining buttonholes can now be Ànished manually, by pressing the "reverse sewing" button (16) at the end of the left side of the buttonhole. Keyhole buttonhole Keyhole buttonholes can be sewn with the buttonhole foot. The keyhole buttonhole can be sewn fully automatically, semi-automatically and manually. Warning: The keyhole buttonhole must be sewn with the rounded end towards the edge of your garment/project. However, the buttonhole will begin sewing from the bartack end. It is important to Àrst mark the length, measuring from the starting point inwards. Always sew the buttonhole from the inside to the outside towards the edge. Choose stitch 46. A standard keyhole buttonhole will appear in the window along with the width, length and stitch density indications. These settings can be altered, Tip: Cut open all buttonholes with the seam ripper. Open the curve of the keyhole buttonhole with a belt punch or awl. 5:5