Pfaff ClassicStyle 2025 Owner's Manual - Page 77

Eyelet embroidery, And this is how it's done

Page 77 highlights

Decorative sewing/Specialty techniques Eyelet embroidery Eyelet embroidery enhances your linens and blouses. Using an eyelet plate (special accessory) and various utility and decorative stitches beautiful embroidery can be produced. And this is how it's done: • Lower the feed dog. • Place the eyelet plate onto the needle plate making sure that the pin (A) at the back of the plate Àts into the middle cutout of the needle plate. Push the plate down at the front. • Tightly hoop your marked embroidery fabric. • With small scissors cut one or two of the fabric threads at the center of the marked eyelet area and push the fabric over the pin of the eyelet plate. The fabric must Àt snugly around the pin. • Remove the presser foot • Place the presser foot lifter in the darning position. • Pull up the bobbin thread and hold it for the Àrst few stitches. • Stitch around the cut with zigzag pattern No. 3. While doing so, turn the hoop with the fabric slowly and evenly. The stitches should be very close to each other. • Secure with a few straight stitches. 6:13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

6:13
Decorative sewing/Specialty techniques
Eyelet embroidery
Eyelet embroidery enhances your linens and blouses. Using
an eyelet plate (special accessory) and various utility and
decorative stitches beautiful embroidery can be produced.
And this is how it’s done:
Lower the feed dog.
Place the eyelet plate onto the needle plate making
sure that the pin (A) at the back of the plate
À
ts into the
middle cutout of the needle plate. Push the plate down
at the front.
Tightly hoop your marked embroidery fabric.
With small scissors cut one or
two of the fabric threads at the
center of the marked eyelet area
and push the fabric over the pin
of the eyelet plate. The fabric
must
À
t snugly around the pin.
Remove the presser foot
Place the presser foot lifter in
the darning position.
Pull up the bobbin thread and hold it for the
À
rst few
stitches.
Stitch around the cut with zigzag pattern No. 3. While
doing so, turn the hoop with the fabric slowly and
evenly. The stitches should be very close to each other.
Secure with a few straight stitches.