Pfaff expression 2048 Owner's Manual - Page 20

Preparing the machine for bobbin winding, Winding the bobbin from the spool pin, Threading, Switch

Get Pfaff expression 2048 PDF manuals and user guides View all Pfaff expression 2048 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Preparations Preparing the machine for bobbin winding Place an empty bobbin so that the pin of the bobbin winder snaps into the slot of the bobbin. The Pfaff logo is facing up. B 2:4 Push the bobbin to the right. Note: The bobbin can only be wound if it is moved fully to the right. Winding the bobbin from the spool pin Place the sewing thread on the spool pin. To obtain free movement of the thread and hold the thread spool firmly, fit a spool cap of the right size for the thread spool. Threading Place the thread into guide A from the front and pull it counter clockwise around the pre-tension device B. Make sure the thread is pulled securely inside the pre-tension device for correct thread tension. Pull the thread under the thread guide C (from back to front). Wind the thread tail around the bobbin several times in a clockwise direction. A Switch on the main switch Hold the end of the thread firmly and press the foot control. As soon as the bobbin is full, the winding action will be stopped automatically. Push the bobbin to the left, cut the thread and remove bobbin from the winder. C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
2:4
B
A
C
Preparations
Preparing the machine for bobbin winding
Place an empty bobbin so that the pin of the bobbin winder
snaps into the slot of the bobbin. The Pfaff logo is facing up.
Push the bobbin to the right.
Note: The bobbin can only be wound if it is moved fully to the right.
Winding the bobbin from the spool pin
Place the sewing thread on the spool pin. To obtain free
movement of the thread and hold the thread spool
fi
rmly,
fi
t a
spool cap of the right size for the thread spool.
Threading
Place the thread into guide A from the front and pull it counter
clockwise around the pre-tension device B. Make sure the
thread is pulled securely inside the pre-tension device for
correct thread tension. Pull the thread under the thread guide
C (from back to front). Wind the thread tail around the bobbin
several times in a clockwise direction.
Switch on the main switch
Hold the end of the thread
fi
rmly and press the foot control. As
soon as the bobbin is full, the winding action will be stopped
automatically. Push the bobbin to the left, cut the thread and
remove bobbin from the winder.