Pfaff expression 2048 Owner's Manual - Page 24
Threading the needle
View all Pfaff expression 2048 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Preparations B Threading the needle Switch off the main switch. Raise the presser foot lifter (51). Place the thread on the spool pin and fit a spool cap of the right size. Using both hands, pull the thread into thread guide A from the front. Place the thread from right to left into the pre- tension device B. Now pass it through the left threading slot downwards. Pull the thread around the stop C in the right threading slot and upwards to the take-up lever (40). The A thread must be pulled into the take-up lever from left to right. Pass the thread downwards in the right-hand threading slot. Pull the thread from the side behind one of the two thread guides D. To thread the needle, please refer to the next page. C D 2:8
2:8
A
B
C
D
Preparations
Threading the needle
Switch off the main switch.
Raise the presser foot lifter (51). Place the thread on the spool
pin and
fi
t a spool cap of the right size.
Using both hands, pull the thread into thread guide A from
the front. Place the thread from right to left into the pre-
tension device B. Now pass it through the left threading slot
downwards. Pull the thread around the stop C in the right
threading slot and upwards to the take-up lever (40). The
thread must be pulled into the take-up lever from left to right.
Pass the thread downwards in the right-hand threading slot.
Pull the thread from the side behind one of the two thread
guides D.
To thread the needle, please refer to the next page.