Pfaff hobby 1132 Owner's Manual - Page 39
Adjusting buttonhole stitch density
View all Pfaff hobby 1132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Utility stitches and practical sewing 2:13 H I stitch A1-A4 4-5 0.5-1 1-5 B/J Buttonhole with a gimp thread With the buttonhole foot raised, hook the cord on the cord spur (H) at the back of the buttonhole foot. Bring the ends toward you under the buttonhole foot until they clear the front end. Hook the Àller cord into the forks (I) on the front of foot to hold them tight. Lower the needle into the garment where the buttonhole will start and lower the foot. Depress the foot control gently and sew the buttonhole over the cord The sewing sequences are the same as the normal buttonhole. Remove the fabric from the machine and cut the sewing threads. Pull the left end of the Àller cord to tighten it. Thread the end through a darning needle, draw to the wrong side of the fabric and cut. Note: To sew a corded buttonhole longer than 2.5 cm, use the buttonhole foot B. Hook the Àllar cord on the spur as shown in the picture, and hold it with your hand. Adjusting buttonhole stitch density Stitch density of buttonhole sewing should be adjusted within a range of the " " on the stitch length dial.