Philips 10001872 User manual (English) - Page 16

13 LATTE MACCHIATO Fill the milk container SEE INSTRUCTIONS ON PAGE 39-40 FOR OPTIMAL MILK DISPENSING. WARNING! DO NOT OPEN THE SERVICE DOOR DURING THE BREWING, DISPENSING, WASHING OR RINSE CYCLE. 1 strong aroma espresso coffee 08:33 2 strong aroma latte macchiato 08:33 3 strong aroma latte macchiato 08:33 Press the button. 4 brewing in progress latte macchiato Select latte macchiato by navigating the click wheel with your finger. Select the aroma by pressing the button one or more times. 5 add milk? latte macchiato 6 rinsing milk circuit latte macchiato 08:33 Press the button once for 1 cup and twice for 2 cups. The latte macchiato will be brewed. After this, the machine allows you to dispense more milk if you wish. This option remains active for approx. 3 seconds. To activate it, press the button. Once the desired quantity has been reached, press the button again to stop dispensing. The machine will propose cleaning the milk circuits. Press the button to clean the internal circuits. If the user wishes to continue preparing other drinks the machine will keep the "rinsing milk circuit" signal active. After 20 minutes of inactivity, the machine requires the user to perform a rinsing cycle as described in step 7. If the machine is turned off immediately after dispensing a milk beverage, the next time the machine is turned on it will require the user to perform a rinsing cycle. Note: Before performing the "milk rinsing circuit" function make sure that: 1. a large enough container is positioned under the dispensing head; 2. the water tank contains a sufficient quantity of water. milk circuit washing espresso coffee 08:33 After 14 days from the first dispensing of a milk-based beverage, the message "milk circuit washing" is displayed; it is advisable to clean the milk circuits as shown on page 26. After another 7 days the machine stops dispensing milk-based beverage and the milk circuits must be washed; during this phase, coffee and hot water may be dispensed.