Philips 10001872 User manual (English) - Page 20

BEVERAGE PROGRAMMING 17 Each beverage can be programmed according to your individual taste. 1. MANUAL PROGRAMMING For all beverages you can quickly program the quantity of coffee and/or milk dispensed in the cups whenever the brew button is pressed. Select the type of beverage you want to program, then press and hold the button until the display shows (for example): self-instruction active espresso coffee The machine dispenses coffee or milk. When the desired amount is reached, press the The display will show: new quantity saved espresso coffee button again. (Only beverages with coffee and milk): for beverages with coffee and milk, you need to save the desired quantity of both milk and coffee by pressing the button. This adjustment must be performed during the relevant dispensing phase in the normal beverage dispensing process. The dispensed quantity of coffee and/or milk remains stored and replaces any previous settings. 2. PROGRAMMING FROM THE "BEVERAGE SETTINGS" MENU To adjust the settings for preparing beverages: press the settings" by navigating the click wheel with your finger. In this phase you can: button and select "beverage exit the programming mode. navigate the click wheel with your finger to select: - the quantity of coffee to be brewed; - the quantity of milk to be dispensed; - the coffee temperature; - the coffee prebrewing. beverage settings select coffee or milk to change the quantity per cup. save the new settings. select the quantity of coffee to be ground (opti-dose), or select pre-ground coffee, and/or set: - coffee temperature - coffee prebrewing restore factory settings. The following page describes how to program a beverage containing milk and coffee; the programmable settings for each beverage may differ according to the type of beverage.