Philips 32PF9630 User Guide - Page 23
Multi channel Surround receiver, HDMI High Definition Multimedia Interface connector
View all Philips 32PF9630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
HDMI (High Definition Multimedia Interface) connector AUDIO CENTRE R HDMI IN R HDMI HDMI is the leading new standard for Digital High Definition video and audio interconnection. Eg. with a Digital Set top box, with HDMIequipped devices like a PC, DVD-R, AV receiver... Note: the HDMI connector is compatible with DVI-devices and a DVI to HDMI conversion cable is included. (Then also connect the audio cables.) SUBW. L L The HDMI IN connector allows - the following TV and monitor display modes: 2 EDTV 640/720 x 480p 720 x 576p HDTV 1920 x1080i 1280 x 720p 1152i 1 1 VGA SVGA XGA 640 x 480 800 x 600 1024 x 768 60 Hz 60 Hz 60 Hz - uncompressed HD content - encrypted or non encrypted signals. & Connect the digital HDMI output of your HD device (e.g. PC, DVD player, Set Top Box..) 1 to the HDMI connector of your TV. é In case a HD-DVI device (and if audio is present) is connected also connect the audio cable 2 to the AUDIO outputs of your HD device and to the R (right) and L (left) HDMI (AV3) inputs of the panel of the TV. Notes: - Proper working is only guaranteed with HDMI compliant consumer products. - Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display; - If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong with the set. - If possible, use the XGA 1024x768@60Hz video mode to obtain the best image quality for your monitor. - In case no signal is detected from your HDMI device, turn off the HDMI device and then on again. To get an optimal viewing, it is advised to switch your DVD player to one of the following TV display standards: 1920x1080i, 1280x720p, 720x480i or 720x480p. Multi channel Surround receiver AUDIO CENTRE R SUBW. L 1 2 & Connect the audio cable to the multi channel Surround receiver and to AUDIO RECEIVER L and R next to the CENTRE connector of your TV 1. Note: turn off the TV and your surround receiver before connecting them. Set the Surround receiver's volume to minimum. é If you want the loudspeakers of your TV to act as center speaker, also connect an audiocable to the multi channel Surround receiver and to the CENTRE connector of your TV 2. " Select Center Input On in the Source menu. See p. 9. The loudspeakers of the TV will now only produce center sound, the loudspeakers connected to the audio receiver will produce Surround Sound.The volume has to be controlled via the multi channel Surround receiver. Note: No sound will be heard when a TV channel or external source is blocked via the Channel Lock menu (see p. 14). 21