Philips 42FD9954 User manual - Page 5

Use of the remote control VGA press repeatedly to select your computer connected to the VGA 1 or 2 connector or to the DVI-D connector. AV1, AV2, AV3 press to select the peripherals connected to the connector indicated on the monitor. BRIGHTNESS +/- to adjust the brightness level of the picture CONTRAST +/- to adjust the contrast level of the picture ZOOM ON/OFF to activate/de-activate the zoom function. See p. 7. ZOOM IN/OUT to adjust the zoom factor and to change the magnification of the picture when zoom is activated. See p. 7. POWER B VGA AV1 AV2 AV3 BRIGHTNESS CONTRAST ZOOM ON/OFF ZOOM IN ZOOM OUT MENU OK MUTE V ¬ 1 2 45 78 AV MUTE 0 CH/PR 3 6 9 q B to switch to standby or on again MENU to switch the menu on/off cursor buttons to select your choice and to alter a selected adjustment. OK to activate your choice V press - or + to adjust the volume ¬ Mute button Mute the sound or restore it CH/PR Program selection To browse through the sources selected. AV MUTE to mute the picture and the sound or restore it (if the monitor is used in monitor mode). When activated a green indicator starts blinking in front of the monitor. q Picture format See Picture 2 menu, p. 7. Press the q button to switch between the different picture formats. On screen information When the monitor is used in the monitor mode, information about the active source (AV1, AV2, AV3, VGA1, VGA2 or DVI-D), and the supported video,VGA or HD-format of the selected source is displayed on the screen together with the selected picture format and icons informing about selected sound mode and AV or audio mute. Use of the remote control 5