Philips CD3653Q User manual - Page 16

Warning •• Check the battery polarity when inserting in the battery compartment. Incorrect polarity may damage the product. a The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. b Place the handset on the base station to power up. Note •• If the handset becomes warm when the batteries are being charged, it is normal. Check the battery level The battery icon displays the current battery level. The battery is full, the talk time can go up to 14 hours. The battery is empty. Charge it. The handsets turn off if the battery is empty. If you are on the phone, you hear warning tones when the battery is almost empty.The call gets disconnected after the warning. Set the date and time 1 Press menu. 2 Select [CLOCK & ALARM] > [SET DATE/TIME], then press [OK] to confirm. 3 Press the numeric buttons to enter the date, then press [OK] to confirm. »» On the handset, the time set menu is displayed. 4 Press the numeric buttons to enter the time. • If the time is in 12-hour format, press call ID / Ph.Book to select [AM] or [PM]. 5 Press [OK] to confirm. Set the date and time format 1 Press menu. 2 Select [CLOCK & ALARM] > [SET FORMAT], then press [OK] to confirm. 16 EN