Philips CD3653Q User manual - Page 38
Remote access, Activate/deactivate the remote access, Call screening, From the base
UPC - 609585176768
View all Philips CD3653Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 Press [OK] to confirm. »» All old messages are permanently deleted. Note •• You can delete the read messages only. No deleted messages can be recovered. Call screening You can hear the caller while he is leaving a message. Then you can decide whether or not to talk to the caller directly. From the base Press / to adjust the speaker volume during call screening. The lowest volume level turns off the call screening. Set the sound quality of the message You can adjust the sound quality of the messages received from the answering machine. 1 Press menu. 2 Select [ANSWER MACHINE] > [SETTINGS] > [MSG QUALITY], then press [OK] to confirm. 3 Select the new setting, then press [OK] to confirm. »» The setting is saved. Set the ring delay You can set the number of times the phone rings before the answering machine picks up the call. 1 Press menu. 2 Select [ANSWER MACHINE] > [SETTINGS] > [RING DELAY], then press [OK] to confirm. 3 Select a new setting, then press [OK] to confirm. »» The setting is saved. 38 EN Note •• Ensure that the answering machine is switched on before this feature can be applied. Tip •• When you access the answering machine remotely, you are recommended to set the ring delay to [ECONOMY] mode. This is a cost effective way to manage your messages. When there are new messages, the answering machine picks up the call after 3 rings; When there is no messages, it picks up the call after 5 rings. Remote access You can operate your answering machine when you are away from home. Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code. Note •• The preset remote access PIN code is 0000. Activate/deactivate the remote access You can allow or block remote access to the answering machine. 1 Press menu. 2 Select [ANSW. MACHINE] > [SETTINGS] > [REMOTE ACCESS], then press [OK] to confirm. 3 Select a new setting, then press [OK] to confirm. »» The setting is saved.